HomeMy WebLinkAbout2560386 - F.I. Received Doc. - lighting specification3195 - Forum 2.0 - 3 MODULES - asymmetrical 65° - AS
Code: 412836-0035
In its new release, the Forum 2.0 floodlight has been further
upgraded, featuring even higher output, excellent light control,
easy installation, and long service life. The extreme versatility of
its optics enables it to adapt to different application needs,
ensuring high performance in all circumstances compared to
traditional floodlights. Forum LED 2.0 is available with one, two
or three light modules, and a range of different optics to fully
meet all lighting requirements for all sizes of indoor and outdoor
venues.The great success of this floodlight is also given by the
wide range of solutions, excellent technical features, and the
careful choice of materials and electronic components that
guarantee complete safety during operation and resistance to
accidental impacts, temperature variations and weather
conditions.Easy and safe to install, Forum 2.0 is also equipped
with special devices for perfect aiming and
positioning.Moreover, Forum 2.0 features technical solutions
that increase safety, such as an automatic temperature
controller and surge protector.Finally, LED technology is
increasingly becoming the lighting of choice for stadiums, major
infrastructure, and large areas due to its considerable energy
savings as well as its scenic performance (DMX) and quality
lighting levels that can ensure great safety and visual well-
being.This is why, Disano's Forum LED 2.0 has become one of
the most popular modular LED floodlights used in this type of
application.
GENERAL INFORMATION
Article 3195 - Forum 2.0 - 3 MODULES - asymmetrical 65° - AS
Code 412836-0035
DIMENSIONS AND WEIGHT
Length (mm)651 mm
Width (mm)769 mm
Height (mm)372 mm
Weight (Kg)25 kg
INSTALLATION
Surface exposed to wind
(mm)L 93000 mm², F 424000 mm²
ELECTRICAL CHARACTERISTICS AND CONTROLS
Voltage type AC
Min Voltage (V)220 V
Max Voltage (V)400 V
Min Frequency (Hz)50 Hz
Max Frequency (Hz)60 Hz
Frequency (Hz)50 Hz
Wiring name CLD-S+L
Wiring separate driver with 400V power supply for retrofitting exiting systems is
available.
Power factor ≥0.92
Rated Current 1200 mA
Surge protector (common)
(EN 61547)10 kV, 10 kV
Insulation class Class I
Controllability None
Please contact the Consulting and Design Centre for any technical information. The reported luminous flux is the flux emitted by the light source with a tolerance of ± 10% compared to the indicated
value. The total wattage absorbed by the system will not exceed 10% of the reported value. Technical lighting data may be subject to changes and improvements due to the fast evolution of the
technology. Friday, April 17, 2026
1RECEIVED: 19/05/2026
3195 - Forum 2.0 - 3 MODULES - asymmetrical 65° - AS
Code: 412836-0035 PHOTOMETRIC DATA
Lighting source LED
CRI 70
Power absorption (total) (W)1580 W
CCT 5700 K
Low Flicker luminaire with very low flicker: evenly distributed light for greater visual
safety.
Colour consistency SDCM4
Asymmetry degrees 65 °
Beam angle tilt (°)+90° -45°
LED flux maintenance 100000 hr, L 90, B 10
MECHANICAL CHARACTERISTICS
Impact resistance rating (IK)IK10
IP 66
Ambient temperature - min -40 °C
Ambient temperature - max 45 °C
Please contact the Consulting and Design Centre for any technical information. The reported luminous flux is the flux emitted by the light source with a tolerance of ± 10% compared to the indicated
value. The total wattage absorbed by the system will not exceed 10% of the reported value. Technical lighting data may be subject to changes and improvements due to the fast evolution of the
technology. Friday, April 17, 2026
2RECEIVED: 19/05/2026
3195 - Forum 2.0 - 3 MODULES - asymmetrical 65° - AS
Code: 412836-0035
DOWNLOAD
MOUNTS
AssemblyInstructions driver ON-OFF - DALI -
DMX.pdf
AssemblyInstructions forum3mod 2 0 01-24.pdf
DESIGNS
TechnicalDrawing forum20a3.dxf
MATERIALS AND COLOURS
Housing in die-cast aluminium, with cooling fins.
Optics high-performance, extra-clear polycarbonate secondary lenses.
Diffuser
injected moulded in anti-yellowing extra-clear polycarbonate, in V2 self-
extinguishing, UV-stabilised material, resistant to impacts (UNI-EN 12150-
1 : 2001).
Heat sink
the heat sink is designed and made to allow the LEDs to operate at
temperatures capable of ensuring excellent performance/output and long
service life.
Coating the fully automated powder-coating cycle involves a polyester-based, salt-
spray corrosion-resistant and UV-stabilised paint., Anthracite = RAL 7021
Special coating (UPON
REQUEST)
Upon request: protective coating recommended for marine environments
within 5 km (3 miles) of the sea.
Colour Anthracite
Equipment
- with bracket.
- temperature controller with auto-reset.
- EN 61547 compliant surge protection.
- anti-condensation valve.
- goniometric scale.
Registered Design DM/100271
STANDARDS AND COMPLIANCE
Photobiological safety class RG0 Ethr
Markings and tests ENEC+, CE, ENEC
Reference standards EN60598-1. They have a degree of protection according to the EN60529
standard.
Laboratory Tests certified ball impact resistant in accordance with DIN 18032-3:2018.
Energy Label C
GEAR
Sensors
Upon request
- adjustment with DIMM
1-10V (20 to 100%) or DALI driver
- power line carrier
remote control
- wireless control system
WARRANTY
After sales warranty 5 yr
Please contact the Consulting and Design Centre for any technical information. The reported luminous flux is the flux emitted by the light source with a tolerance of ± 10% compared to the indicated
value. The total wattage absorbed by the system will not exceed 10% of the reported value. Technical lighting data may be subject to changes and improvements due to the fast evolution of the
technology. Friday, April 17, 2026
3RECEIVED: 19/05/2026
3195 - Forum 2.0 - 3 MODULES - asymmetrical 65° - AS
Code: 412836-0035
197 Adjustable light beam pointing mount
484 Pointing bracket
7 Type 7 - Driver IP66 DMX/RDM - AS
490 Bracket spacer
482 ASYM deflector - 3mod
6 TYPE 6 - ON-OFF/DALI - AS
488 Driver vertical support
Please contact the Consulting and Design Centre for any technical information. The reported luminous flux is the flux emitted by the light source with a tolerance of ± 10% compared to the indicated
value. The total wattage absorbed by the system will not exceed 10% of the reported value. Technical lighting data may be subject to changes and improvements due to the fast evolution of the
technology. Friday, April 17, 2026
4RECEIVED: 19/05/2026