Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
2560502 - F.I. Received Doc. - Engineering Service Report
Engineering Services Report Proposed development for GEDA Construction Ltd at Scarnageeragh, Emyvale,Co. Monaghan. Prepared By: Marc McBride Architects, Consulting Engineers, & Building Surveyors. RECEIVED: 09/07/2026 1 Table of Contents 1.0 Introduction ........................................................................................................................... 2 1.1 Purpose of Report ............................................................................................................. 2 1.2 Proposed Development .................................................................................................... 2 1.3 Site Location & Description ............................................................................................... 2 1.4 Scope of Engineering Services ........................................................................................... 3 1.5 Relevant Guidelines & Standards ...................................................................................... 3 2.0 Storm Water .......................................................................................................................... 4 2.1 Introduction ...................................................................................................................... 4 2.2 Existing Surface Water Network ....................................................................................... 4 2.3 SuDS Treatment Train Selection for Development ........................................................... 5 3.0 Foul Drainage ......................................................................................................................... 7 3.1 Existing Drainage - Existing................................................................................................ 7 3.2 Foul Drainage – Proposed ................................................................................................. 8 Appendix A – Storm Network Report Appendix B – Hydrobrake, Attenuation Tank, Grasscrete & Petrol Interceptor Details Appendix C – Foul Network Report Appendix D – Uisce Eireann Confirmation of Feasability RECEIVED: 09/07/2026 2 1.0 Introduction 1.1 Purpose of Report The purpose of this Engineering Services Report is to outline the proposed Storm, Foul Water and Potable Water strategy for the proposed development. The report assesses the existing infrastructure in the vicinity of the site and demonstrates how the development can be adequately serviced in accordance with current standards and best practice. This report has been prepared in support of a planning application and aims to demonstrate that the proposed development can be serviced without adverse impact on existing networks or the surrounding environment. The design approaches outlined herein have been developed in accordance with the requirements of Uisce Éireann, the Monaghan County Council Development Plan, and relevant national guidelines, including Sustainable Drainage Systems (SuDS) principles. This report confirms that, subject to detailed design, the proposed development can be effectively serviced in terms of foul drainage, surface water management and potable water. 1.2 Proposed Development The proposed development will consist of the following: • Construction of 30 No. dwellings. • Boundary treatments, hard & soft landscaping, public lighting, new estate road, connection to existing mains services together with all ancillary and associated site works. 1.3 Site Location & Description The site for the proposed development is located at Emyvale Co. Monaghan. It is a greenfield site and can be accessed from the Market House Road. An existing house will be demolished in order to construct this entrance. To the North of the site are existing detached dwellings. To the West and South is agricultural land and To the East is the existing Oreil Park housing estate. RECEIVED: 09/07/2026 3 1.4 Scope of Engineering Services The engineering services for this project cover the assessment and design of all necessary site services to support the proposed development. This includes: Storm Water: Design of surface water management, incorporating Sustainable Drainage Systems (SuDS), Nature bases solutions (NBS) attenuation, and controlled discharge. Foul Water: Assessment of existing infrastructure and design of the proposed foul drainage system, including connection to the public network. Potable Water: Assessment of the existing watermain infrastructure and design of the proposed potable water distribution network to serve the development, including connection to the public supply, provision of adequate pressure and flow, and compliance with fire flow requirements where applicable. Compliance: Ensuring all designs meet Uisce Éireann standards, relevant national guidance, and Monaghan County Council requirements. This report demonstrates that the proposed development can be adequately serviced in a safe and sustainable manner. 1.5 Relevant Guidelines & Standards The design and assessment of engineering services for the proposed development have been carried out in accordance with the following guidelines, standards, and statutory requirements: 1. Irish Water / Uisce Éireann Standards All foul water designs will comply with Uisce Éireann connection requirements, specifications, and technical guidance for water and wastewater infrastructure. 2. Monaghan County Development Plan The development proposals adhere to the policies and objectives set out in the Monaghan County Development Plan regarding infrastructure provision, environmental protection, and sustainable development. 3. Sustainable Drainage Systems (SuDS) Guidance Surface water management design follows the principles of SuDS as recommended in the Greater Dublin Strategic Drainage Study (GDSDS) and CIRIA guidance, ensuring runoff reduction, attenuation, and water quality protection. RECEIVED: 09/07/2026 4 4. Health and Safety and Construction Considerations Designs account for safe construction, operation, and maintenance of all water and drainage infrastructure. The above standards ensure that the proposed development can be serviced safely, sustainably, and in full compliance with national and local regulatory requirements. 2.0 Storm Water 2.1 Introduction The proposed surface water design has incorporated Sustainable Urban Drainage Systems to adequately manage rainfall runoff from the site. The proposed surface water design for the site will be in compliance with the SuDS Manual Ciria Report 753 and the SuDS design elements in the development were selected from The Four Pillars of SuDS. Figure 1 – The Four Pillars of SuDS (Ref – CIRIA Report C75 2.2 Existing Surface Water Network A site visit and survey were carried out prior to the commencement of the surface water design. It was established that there is no existing surface water sewer network within the site. The is an existing watercourse which runs approx. 90m from the entrance to the site. RECEIVED: 09/07/2026 5 2.3 SuDS Treatment Train Selection for Development In accordance with SuDS Manual Ciria Report 753, the following SuDS elements were chosen: Swales – It is proposed to construct 3No. swales for the development. These will be placed along part of the main access road. All run-off from the roadway running parallel to the swales will discharge to it. All run-off will then filtrate into the existing subsoil. An open grate manhole with the lid constructed 300mm higher than the swale base will allow for discharge to the storm sewer should the inflow exceed the infiltration rate. The swales are a shallow, vegetated drainage channel designed to convey, store, and treat surface water runoff as part of a Sustainable Drainage Systems (SuDS) strategy. Unlike conventional piped drainage, the swales will slow the flow of runoff by allowing water to spread across a wider, gently sloping channel lined with grass or other vegetation. This reduction in flow velocity helps to reduce peak runoff rates and provides temporary storage during rainfall events, which can reduce downstream flooding risk. As water travels through the swale, sediment and pollutants are filtered and trapped by the vegetation and underlying soil, improving water quality before it enters the wider drainage network or, in this instance, infiltrates into the ground. Swales are an effective SuDS measure as they mimic natural drainage processes, provide attenuation and treatment at surface level, and can also deliver additional benefits such as biodiversity enhancement, visual amenity, and easier inspection and maintenance compared to underground drainage systems. Swales maintenance – The proposed swale shall be maintained under a planned inspection and maintenance regime to ensure its continued effectiveness in conveying, attenuating, and treating surface water runoff. During the initial establishment period, maintenance shall include regular watering of vegetation during dry weather, weed control, reseeding of bare patches where necessary, and monitoring to ensure healthy vegetation establishment. Routine long-term maintenance shall include regular grass cutting to maintain appropriate vegetation height and preserve hydraulic capacity, removal of litter, debris, and accumulated sediment, and periodic inspection of inlet and outlet structures to ensure they remain free-flowing and unobstructed. The swale shall also be inspected for signs of erosion, scour, standing water or compaction. Any excessive sediment build-up shall be removed to maintain storage and conveyance capacity. This maintenance regime will ensure the swale continues to provide effective surface water attenuation, water quality improvement, and biodiversity benefits over its operational life, in accordance with CIRIA SuDS best practice guidance and local authority taking-in-charge requirements. RECEIVED: 09/07/2026 6 Grasscrete It is proposed to install Grasscrete paving in designated areas of the development as part of the surface water management strategy. Grasscrete is a permeable paving system consisting of reinforced concrete with topsoil and grass, allowing surface water to infiltrate directly into the underlying ground. This system will be used for the 2 no public parking areas where there is light vehicular loading and overflow parking. Grasscrete functions as a Sustainable Drainage Systems (SuDS) measure by reducing the volume and rate of surface water runoff entering the conventional drainage network. Unlike impermeable hardstanding, it allows rainfall to percolate through the surface and into the subsoil below, replicating natural drainage processes and promoting groundwater recharge. The grassed surface also assists in filtering sediments and pollutants from runoff, improving water quality before infiltration. In addition to its drainage benefits, Grasscrete provides a visually softer alternative to traditional paving, reduces the urban heat island effect, and can enhance the overall appearance and biodiversity value of the site. Grasscrete Maintenance The proposed Grasscrete areas shall be maintained under a planned inspection and maintenance regime to ensure their continued structural and hydraulic performance. During the initial establishment period, maintenance shall include regular watering during dry weather, weed control, and reseeding of any bare or damaged areas to establish healthy grass coverage. Routine long-term maintenance shall include regular grass cutting, removal of debris and sediment build-up from the surface voids to maintain infiltration capacity, and periodic inspection for signs of rutting, settlement, or blockage. Any compacted or damaged areas shall be repaired promptly to preserve both the structural integrity and permeability of the system. This maintenance regime will ensure that the Grasscrete continues to provide effective surface water infiltration, runoff reduction, and visual amenity benefits throughout its operational life, in accordance with SuDS best practice guidance and local authority taking-in-charge requirements. Attenuation and Flow Control – It is proposed to construct two attenuation storage tanks within the development. The first tank (Attenuation Tank 1) will be constructed in the large green area inin the center of the site. A hydrobrake, constructed in manhole S8, will limit the flow to 1l/s. During storm events, any excess flow within the storm sewer network upstream of manhole S8 will be stored in RECEIVED: 09/07/2026 7 attenuation tank 1. The second tank (Attenuation Tank 2) will be constructed in the green area close to the entrance. A hydrobrake, constructed in manhole S10 will limit the flow from the network to a calculated greenfield run-off value of 8.6/s. This value was calculated using the UK Suds website. During storm events when the discharge exceeds 4.4/s all excess water within the storm sewer network upstream of manhole S10 will be attenuated in attenuation tank 2. A design to establish the size of both the attenuation tanks and hydrobrakes has been completed using Causeway Flow. All SUDS elements have been sized to cater for a 1 in 100-year storm event with an additional 20% allowance for climate change. The surface water will also pass through a bypass interceptor prior to being discharged. Please refer to Appendix A for the storm network report and Appendix B for details of the hydrobrakes, attenuation tanks, grasscrete and petrol interceptor. Attenuation and Flow Control maintenance - The proposed underground attenuation tanks and associated Hydro-Brake flow controls shall be subject to a planned inspection and maintenance regime to ensure the system continues to provide effective stormwater storage and controlled discharge. Routine maintenance shall include regular inspection of upstream catchpits, silt traps, and inlet structures to remove accumulated sediment, debris, and litter to prevent blockage of the tank and flow control. The attenuation tank shall be inspected at least annually, and after significant storm events, to check for excessive sediment build-up, structural damage, or standing water that may indicate blockage or reduced performance. Access chambers should be maintained clear to allow for inspection and cleaning, with jetting or vacuum cleaning undertaken where sediment accumulation is identified. The Hydro-Brake flow control device shall be inspected periodically to ensure the orifice remains free from obstruction and is operating at the designed discharge rate, with any debris removed as necessary. Any defects in pipework, chambers, or structural components shall be repaired promptly. This maintenance regime will ensure the attenuation system continues to provide effective runoff storage, flow regulation, and flood risk management over its operational life, in accordance with CIRIA SuDS best practice guidance and local authority taking-in-charge requirements. 3.0 Foul Drainage 3.1 Existing Drainage - Existing A site visit and survey were carried out prior to the commencement of the foul water design. It was established that there is an existing foul sewer approximately 45m East of the proposed entrance. RECEIVED: 09/07/2026 8 3.2 Foul Drainage – Proposed It is proposed to collect all foul sewer discharge from the site using a suitably sized network and discharge to the existing foul network located 46m to the east of the proposed entrance. A pre- connection enquiry was lodged with Uisce Eireann, and a confirmation of feasibility has been received. Please refer to Appendix D. 4.0 Potable Water 4.1 Watermain – Existing There is an existing 75mm watermain running in the road at the proposed entrance to the site. 4.2 Watermain – Proposed It is proposed to construct a 100mm watermain to service the dwellings within the site. A connection to the existing watermain will be made close to the proposed entrance to the site. A pre-connection enquiry was lodged with Uisce Eireann, and a confirmation of feasibility has been received. Please refer to Appendix D. RECEIVED: 09/07/2026 APPENDIX A Stormwater Calculations RECEIVED: 09/07/2026 MNK Engineering Limited t/as CS PringleFile: 6532 Emyvale Latest.pfd Network: Storm Network marc mcbride 24/06/2026 Page 1 Flow+ v15.0 Copyright © 1988-2026 Causeway Technologies Ltd Design Seƫngs Rainfall Methodology Return Period (years) AddiƟonal Flow (%) FSR Region M5-60 (mm) RaƟo-R CV Time of Entry (mins) FSR 100 0 Scotland and Ireland 17.000 0.350 0.750 5.00 Maximum Time of ConcentraƟon (mins) Maximum Rainfall (mm/hr) Minimum Velocity (m/s) ConnecƟon Type Minimum Backdrop Height (m) Preferred Cover Depth (m) Include Intermediate Ground Enforce best pracƟce design rules 30.00 50.0 1.00 Level Soĸts 0.200 1.200 ✓ ✓ Nodes Name Area (ha) T of E (mins) Cover Level (m) Diameter (mm) EasƟng (m) Northing (m) Depth (m) S1 S2 S3 S4 S5 S6 S7 S8 S9 S9.1 S10 S11 S11.1 S12 Sext AƩenuaƟon Tank 1 AƩenuaƟon Tank 2 0.116 0.038 0.150 0.078 0.068 0.028 0.021 0.035 0.008 5.00 5.00 5.00 5.00 5.00 5.00 5.00 5.00 5.00 5.00 5.00 78.250 77.100 77.000 78.450 79.800 78.700 78.200 77.580 75.800 73.750 71.250 70.000 66.600 63.480 61.762 78.500 71.600 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 7051661.202 7051661.208 7051667.037 7051697.301 7051768.294 7051768.297 7051768.301 7051786.383 7051802.474 7051812.302 7051822.064 7051821.793 7051849.969 7051877.984 7051896.142 7051758.870 7051817.781 3748347.993 3748393.619 3748399.842 3748369.248 3748347.186 3748369.248 3748399.842 3748399.842 3748412.525 3748433.129 3748453.775 3748475.921 3748475.774 3748475.921 3748477.522 3748393.161 3748453.779 1.500 1.500 1.526 1.425 2.200 2.093 3.140 2.594 3.000 4.000 2.336 4.500 3.700 1.500 0.390 3.400 2.600 Links Name US Node DS Node Length (m) ks (mm) / n US IL (m) DS IL (m) Fall (m) Slope (1:X) Dia (mm) T of C (mins) Rain (mm/hr) Name Vel (m/s) Cap (l/s) Flow (l/s) US Depth (m) DS Depth (m) Σ Area (ha) Σ Add InŇow (l/s) Pro Depth (mm) Pro Velocity (m/s) 1.000 S1 S2 45.626 0.600 76.750 75.600 1.150 39.7 225 5.37 50.0 1.000 2.083 82.8 15.7 1.275 1.275 0.116 0.0 66 1.614 1.001 S2 S3 8.527 0.600 75.600 75.549 0.051 167.2 225 5.51 50.0 1.001 1.008 40.1 20.9 1.275 1.226 0.154 0.0 116 1.019 1.002 S3 S7 101.264 0.600 75.474 75.060 0.414 244.6 300 7.19 50.0 1.002 1.001 70.7 41.2 1.226 2.840 0.304 0.0 164 1.037 2.000 S4 S6 70.996 0.600 77.025 76.607 0.418 170.0 225 6.18 50.0 2.000 1.000 39.7 10.6 1.200 1.868 0.078 0.0 79 0.846 3.000 S5 S6 22.062 0.600 77.600 76.607 0.993 22.2 225 5.13 50.0 3.000 2.788 110.8 9.2 1.975 1.868 0.068 0.0 44 1.702 2.001 S6 S7 30.594 0.600 76.607 75.220 1.387 22.1 225 6.37 50.0 2.001 2.798 111.2 23.6 1.868 2.755 0.174 0.0 70 2.230 1.003 S7 S8 18.082 0.600 75.060 74.986 0.074 244.4 300 7.49 50.0 1.003 1.001 70.8 64.8 2.840 2.294 0.478 0.0 227 1.130RECEIVED: 09/07/2026 MNK Engineering Limited t/as CS PringleFile: 6532 Emyvale Latest.pfd Network: Storm Network marc mcbride 24/06/2026 Page 2 Flow+ v15.0 Copyright © 1988-2026 Causeway Technologies Ltd Links Name US Node DS Node Length (m) ks (mm) / n US IL (m) DS IL (m) Fall (m) Slope (1:X) Dia (mm) T of C (mins) Rain (mm/hr) Name Vel (m/s) Cap (l/s) Flow (l/s) US Depth (m) DS Depth (m) Σ Area (ha) Σ Add InŇow (l/s) Pro Depth (mm) Pro Velocity (m/s) 1.004 S8 S9 20.489 0.600 74.986 74.300 0.686 29.9 300 7.61 50.0 1.004 2.887 204.1 67.6 2.294 1.200 0.499 0.0 119 2.602 1.005 S9 S9.1 22.828 0.600 72.800 72.039 0.761 30.0 300 7.74 50.0 1.005 2.881 203.6 72.4 2.700 1.411 0.534 0.0 123 2.644 1.007 S10 S11 22.148 0.600 68.914 68.500 0.414 53.5 300 8.05 50.0 1.007 2.154 152.2 73.5 2.036 1.200 0.542 0.0 147 2.135 1.008 S11 S11.1 28.176 0.600 65.500 64.561 0.939 30.0 300 8.21 50.0 1.008 2.881 203.6 73.5 4.200 1.739 0.542 0.0 125 2.656 1.010 S12 Sext 18.228 0.600 61.980 61.372 0.608 30.0 300 8.48 50.0 1.010 2.881 203.6 73.5 1.200 0.090 0.542 0.0 125 2.656 4.000 AƩenuaƟon Tank 1 S7 11.558 0.600 75.100 75.060 0.040 288.9 300 5.21 50.0 4.000 0.920 65.0 0.0 3.100 2.840 0.000 0.0 0 0.000 1.006 S9.1 S10 22.838 0.600 69.750 68.989 0.761 30.0 300 7.88 50.0 1.006 2.881 203.6 72.4 3.700 1.961 0.534 0.0 123 2.644 1.009 S11.1 S12 28.015 0.600 62.900 61.980 0.920 30.4 300 8.37 50.0 1.009 2.859 202.1 73.5 3.400 1.200 0.542 0.0 125 2.642 5.000 AƩenuaƟon Tank 2 S10 4.283 0.600 69.000 68.989 0.011 389.4 225 5.11 50.0 5.000 0.656 26.1 0.0 2.375 2.036 0.000 0.0 0 0.000 Pipeline Schedule Link Length (m) Slope (1:X) Dia (mm) Link Type US CL (m) US IL (m) US Depth (m) DS CL (m) DS IL (m) DS Depth (m) Link US Node Dia (mm) Node Type MH Type DS Node Dia (mm) Node Type MH Type 1.000 45.626 39.7 225 Circular 78.250 76.750 1.275 77.100 75.600 1.275 1.000 S1 1200 Manhole Adoptable S2 1200 Manhole Adoptable 1.001 8.527 167.2 225 Circular 77.100 75.600 1.275 77.000 75.549 1.226 1.001 S2 1200 Manhole Adoptable S3 1200 Manhole Adoptable 1.002 101.264 244.6 300 Circular 77.000 75.474 1.226 78.200 75.060 2.840 1.002 S3 1200 Manhole Adoptable S7 1200 Manhole Adoptable 2.000 70.996 170.0 225 Circular 78.450 77.025 1.200 78.700 76.607 1.868 2.000 S4 1200 Manhole Adoptable S6 1200 Manhole Adoptable 3.000 22.062 22.2 225 Circular 79.800 77.600 1.975 78.700 76.607 1.868 3.000 S5 1200 Manhole Adoptable S6 1200 Manhole Adoptable 2.001 30.594 22.1 225 Circular 78.700 76.607 1.868 78.200 75.220 2.755 2.001 S6 1200 Manhole Adoptable S7 1200 Manhole Adoptable 1.003 18.082 244.4 300 Circular 78.200 75.060 2.840 77.580 74.986 2.294 1.003 S7 1200 Manhole Adoptable S8 1200 Manhole Adoptable 1.004 20.489 29.9 300 Circular 77.580 74.986 2.294 75.800 74.300 1.200 1.004 S8 1200 Manhole Adoptable S9 1200 Manhole Adoptable 1.005 22.828 30.0 300 Circular 75.800 72.800 2.700 73.750 72.039 1.411 1.005 S9 1200 Manhole Adoptable S9.1 1200 Manhole Adoptable 1.007 22.148 53.5 300 Circular 71.250 68.914 2.036 70.000 68.500 1.200 1.007 S10 1200 Manhole Adoptable S11 1200 Manhole Adoptable 1.008 28.176 30.0 300 Circular 70.000 65.500 4.200 66.600 64.561 1.739 1.008 S11 1200 Manhole Adoptable S11.1 1200 Manhole AdoptableRECEIVED: 09/07/2026 MNK Engineering Limited t/as CS PringleFile: 6532 Emyvale Latest.pfd Network: Storm Network marc mcbride 24/06/2026 Page 3 Flow+ v15.0 Copyright © 1988-2026 Causeway Technologies Ltd Pipeline Schedule Link Length (m) Slope (1:X) Dia (mm) Link Type US CL (m) US IL (m) US Depth (m) DS CL (m) DS IL (m) DS Depth (m) Link US Node Dia (mm) Node Type MH Type DS Node Dia (mm) Node Type MH Type 1.010 18.228 30.0 300 Circular 63.480 61.980 1.200 61.762 61.372 0.090 1.010 S12 1200 Manhole Adoptable Sext 1200 Manhole Adoptable 4.000 11.558 288.9 300 Circular 78.500 75.100 3.100 78.200 75.060 2.840 4.000 AƩenuaƟon Tank 1 1200 Manhole Adoptable S7 1200 Manhole Adoptable 1.006 22.838 30.0 300 Circular 73.750 69.750 3.700 71.250 68.989 1.961 1.006 S9.1 1200 Manhole Adoptable S10 1200 Manhole Adoptable 1.009 28.015 30.4 300 Circular 66.600 62.900 3.400 63.480 61.980 1.200 1.009 S11.1 1200 Manhole Adoptable S12 1200 Manhole Adoptable 5.000 4.283 389.4 225 Circular 71.600 69.000 2.375 71.250 68.989 2.036 5.000 AƩenuaƟon Tank 2 JuncƟon S10 1200 Manhole Adoptable Manhole Schedule Node EasƟng (m) Northing (m) CL (m) Depth (m) Dia (mm) ConnecƟons Link IL (m) Dia (mm) S1 S2 S3 S4 S5 S6 S7 S8 7051661.202 7051661.208 7051667.037 7051697.301 7051768.294 7051768.297 7051768.301 7051786.383 3748347.993 3748393.619 3748399.842 3748369.248 3748347.186 3748369.248 3748399.842 3748399.842 78.250 77.100 77.000 78.450 79.800 78.700 78.200 77.580 1.500 1.500 1.526 1.425 2.200 2.093 3.140 2.594 1200 1200 1200 1200 1200 1200 1200 1200 0 1 0 1 0 0 0 1 2 0 1 2 3 0 1 0 0 1 0 1 0 0 0 1 2 0 1 2 3 0 1 0 1.000 1.000 1.001 1.001 1.002 2.000 3.000 3.000 2.000 2.001 4.000 2.001 1.002 1.003 1.003 1.004 76.750 75.600 75.600 75.549 75.474 77.025 77.600 76.607 76.607 76.607 75.060 75.220 75.060 75.060 74.986 74.986 225 225 225 225 300 225 225 225 225 225 300 225 300 300 300 300RECEIVED: 09/07/2026 MNK Engineering Limited t/as CS PringleFile: 6532 Emyvale Latest.pfd Network: Storm Network marc mcbride 24/06/2026 Page 4 Flow+ v15.0 Copyright © 1988-2026 Causeway Technologies Ltd Manhole Schedule Node EasƟng (m) Northing (m) CL (m) Depth (m) Dia (mm) ConnecƟons Link IL (m) Dia (mm) S9 S9.1 S10 S11 S11.1 S12 Sext AƩenuaƟon Tank 1 AƩenuaƟon Tank 2 7051802.474 7051812.302 7051822.064 7051821.793 7051849.969 7051877.984 7051896.142 7051758.870 7051817.781 3748412.525 3748433.129 3748453.775 3748475.921 3748475.774 3748475.921 3748477.522 3748393.161 3748453.779 75.800 73.750 71.250 70.000 66.600 63.480 61.762 78.500 71.600 3.000 4.000 2.336 4.500 3.700 1.500 0.390 3.400 2.600 1200 1200 1200 1200 1200 1200 1200 1200 1 0 1 0 1 2 0 1 0 1 0 1 0 1 0 0 1 0 1 0 1 2 0 1 0 1 0 1 0 1 0 0 1.004 1.005 1.005 1.006 5.000 1.006 1.007 1.007 1.008 1.008 1.009 1.009 1.010 1.010 4.000 5.000 74.300 72.800 72.039 69.750 68.989 68.989 68.914 68.500 65.500 64.561 62.900 61.980 61.980 61.372 75.100 69.000 300 300 300 300 225 300 300 300 300 300 300 300 300 300 300 225 SimulaƟon Seƫngs Rainfall Methodology Rainfall Events FSR Region M5-60 (mm) RaƟo-R Summer CV Analysis Speed Skip Steady State Drain Down Time (mins) FSR Singular Scotland and Ireland 17.000 0.350 0.750 Normal x 240 AddiƟonal Storage (m³/ha) StarƟng Level (m) Check Discharge Rate(s) 1 year (l/s) 10 year (l/s) 30 year (l/s) 100 year (l/s) Check Discharge Volume 20.0 ✓ 7.1 11.7 14.1 16.8 x Storm DuraƟons 15 30 60 120 180 240 360 480 600 720 960 1440RECEIVED: 09/07/2026 MNK Engineering Limited t/as CS PringleFile: 6532 Emyvale Latest.pfd Network: Storm Network marc mcbride 24/06/2026 Page 5 Flow+ v15.0 Copyright © 1988-2026 Causeway Technologies Ltd Return Period (years) Climate Change (CC %) AddiƟonal Area (A %) AddiƟonal Flow (Q %) 1 10 30 100 20 20 20 20 0 0 0 0 0 0 0 0 Pre-development Discharge Rate Site Makeup GreenĮeld Method PosiƟvely Drained Area (ha) SAAR (mm) Soil Index SPR Region Growth Factor 1 year Growth Factor 10 year GreenĮeld IH124 1.900 1027 3 0.37 11 0.83 1.37 Growth Factor 30 year Growth Factor 100 year BeƩerment (%) QBar Q 1 year (l/s) Q 10 year (l/s) Q 30 year (l/s) Q 100 year (l/s) 1.65 1.96 0 8.6 7.1 11.7 14.1 16.8 Node S8 Online Hydro-Brake® Control Flap Valve Replaces Downstream Link Invert Level (m) Design Depth (m) Design Flow (l/s) x x 74.986 1.200 1.0 ObjecƟve Sump Available Product Number Min Outlet Diameter (m) Min Node Diameter (mm) (HE) Minimise upstream storage ✓ CTL-SHE-0045-1000-1200-1000 0.075 1200 Node S10 Online Hydro-Brake® Control Flap Valve Replaces Downstream Link Invert Level (m) Design Depth (m) Design Flow (l/s) x x 68.914 1.200 8.6 ObjecƟve Sump Available Product Number Min Outlet Diameter (m) Min Node Diameter (mm) (HE) Minimise upstream storage ✓ CTL-SHE-0133-8600-1200-8600 0.150 1200 Node AƩenuaƟon Tank 1 Carpark Storage Structure Base Inf Coeĸcient (m/hr) Side Inf Coeĸcient (m/hr) Safety Factor Porosity 0.00000 0.00000 2.0 0.95 Invert Level (m) Time to half empty (mins) Width (m) Length (m) 75.100 10.000 20.000 Slope (1:X) Depth (m) Inf Depth (m) 500.0 1.200 Node AƩenuaƟon Tank 2 Carpark Storage Structure Base Inf Coeĸcient (m/hr) Side Inf Coeĸcient (m/hr) Safety Factor Porosity 0.00000 0.00000 2.0 0.95 Invert Level (m) Time to half empty (mins) Width (m) Length (m) 69.000 3.000 10.000 Slope (1:X) Depth (m) Inf Depth (m) 500.0 1.200RECEIVED: 09/07/2026 APPENDIX B Hydrobrake, Attenuation Tank, Grasscrete & Petrol Interceptor Details RECEIVED: 09/07/2026 SECTION A-A SECTION B-B A A B B DATE SITE DESIGNER REF The head/flow characteristics of this Hydro-Brake Optimum Flow Control are unique. Dynamic hydraulic modelling evaluates the full head/flow characteristic curve. The use of any other flow control will invalidate any design based on this data and could constitute a flood risk. Hydro-Brake Optimum DESIGN ADVICE Control Point Head Flow Technical Specification Primary Design Flush-Flo Kick-Flo Mean Flow TM THIS DESIGN LAYOUT IS FOR ILLUSTRATIVE PURPOSES ONLY. NOT TO SCALE. LIMIT OF HYDRO INTERNATIONAL SUPPLY THE DEVICE WILL BE HANDED TO SUIT SITE CONDITIONS FOR SITE SPECIFIC DETAILS AND MINIMUM CHAMBER SIZE REFER TO HYDRO INTERNATIONAL ALL CIVIL AND INSTALLATION WORK BY OTHERS * WHERE SUPPLIED IMPORTANT: HYDRO-BRAKE IS A REGISTERED TRADEMARK FOR FLOW CONTROLS DESIGNED AND MANUFACTURED EXCLUSIVELY BY HYDRO INTERNATIONAL 60 I.D. OUTLET (MINIMUM) POSITION & DIRECTION OF INLET PIPE(S) WILL BE SPECIFIED ON THE CONTRACT DRAWINGS 100mm MIN FOR FIXINGSBENCHING HYDRO-BRAKE OPTIMUM FLOW CONTROL FITTED WITH PIVOTING BYPASS DOOR* SUMP INTAKE SPIGOT ACCESS TO BE POSITIONED ABOVE BYPASS DOOR PIVOTING BYPASS DOOR* PIVOTING BYPASS DOOR OPERATING STEEL ROPE* PULL HANDLE & EYE BRACKET FOR OPERATING ROPE* RUBBER GASKET MASONRY STUD ANCHOR FIXING BOLTS* Hydro International Ltd • Unit 2, Rivermead Court • Kenn Business Park • Windmill Road • Kenn • Clevedon • BS21 6FT • Tel: 01275 878371 • Website: hydro-int.com • Email: stormwater@hydro-int.com This Hydro-Brake ® Optimum includes: •All in Grade stainless steel • Integral pivoting by-pass door allowing clear line of sight through to outlet, c/w operating rope • Media blasted for corrosion resistance • Variable flow rate post installation via adjustable inlet (if necessary) • Indicative Weight: • Product Carbon Footprint: Based on a 3rd party verified EPD: hydro-int.com/epdhydro-int.com/patents (m)(l/s) 1.200 1.000 0.196 0.744 0.398 0.616 0.766 75 48525550 275 100 365 SHE-0045-1000-1200-1000 SHE-0045-1000-1200-1000 25/06/2026 07:53 Emyvale Marc McBride © 2026 Emyvale 1 marc.mcbride@cspringle.com 3 mm 304L 10 kg 23.54 kgCO2e RECEIVED: 09/07/2026 Technical Specification Control Point Head (m)Flow (l/s) Primary Design 1.200 1.000 Flush-Flo™0.196 0.744 Kick-Flo®0.398 0.616 Mean Flow 0.766 0.0 0.2 0.4 0.6 0.8 1.0 0.0 0.5 1.0 1.5 Head (m)Flow (l/s) 0.000 0.000 0.041 0.399 0.083 0.663 0.124 0.720 0.166 0.741 0.207 0.744 0.248 0.738 0.290 0.725 0.331 0.703 0.372 0.660 0.414 0.626 0.455 0.653 0.497 0.678 0.538 0.702 0.579 0.725 0.621 0.747 0.662 0.768 0.703 0.789 0.745 0.809 0.786 0.829 0.828 0.848 0.869 0.866 0.910 0.884 0.952 0.902 0.993 0.919 1.034 0.936 1.076 0.952 1.117 0.968 1.159 0.984 1.200 1.000 DESIGN ADVICE The head/flow characteristics of this SHE-0045-1000-1200-1000 Hydro-Brake® Optimum Flow Control are unique. Dynamic hydraulic modelling evaluates the full head/flow characteristic curve. !The use of any other flow control will invalidate any design based on this data and could constitute a flood risk. DATE 25/06/2026 07:53 SHE-0045-1000-1200-1000SiteEmyvale DESIGNER Marc Mc Bride Hydro -Brake® OptimumRefEmyvale 1 © 2024 Hy dro International, Riv ermead Court, Kenn Business Park, Windmill Road, Kenn, Clev edon, BS21 6FT. Tel 01275 878371 Fax 01275 874979 Web www.hy dro-int.com Email designtools@hydro-int.com hydro-int.com/patents RECEIVED: 09/07/2026 SECTION A-A SECTION B-B A A B B DATE SITE DESIGNER REF The head/flow characteristics of this Hydro-Brake Optimum Flow Control are unique. Dynamic hydraulic modelling evaluates the full head/flow characteristic curve. The use of any other flow control will invalidate any design based on this data and could constitute a flood risk. Hydro-Brake Optimum DESIGN ADVICE Control Point Head Flow Technical Specification Primary Design Flush-Flo Kick-Flo Mean Flow TM THIS DESIGN LAYOUT IS FOR ILLUSTRATIVE PURPOSES ONLY. NOT TO SCALE. ® LIMIT OF HYDRO INTERNATIONAL SUPPLY THE DEVICE WILL BE HANDED TO SUIT SITE CONDITIONS FOR SITE SPECIFIC DETAILS AND MINIMUM CHAMBER SIZE REFER TO HYDRO INTERNATIONAL ALL CIVIL AND INSTALLATION WORK BY OTHERS * WHERE SUPPLIED IMPORTANT: ® ® ® ® 60° I.D. OUTLET (MINIMUM) POSITION & DIRECTION OF INLET PIPE(S) WILL BE SPECIFIED ON THE CONTRACT DRAWINGS 100mm MIN FOR FIXINGSBENCHING HYDRO-BRAKE OPTIMUM FLOW CONTROL FITTED WITH PIVOTING BYPASS DOOR* SUMP ADJUSTABLE INTAKE SPIGOT ACCESS TO BE POSITIONED ABOVE BYPASS DOOR PIVOTING BYPASS DOOR OPERATING STEEL ROPE* PULL HANDLE & EYE BRACKET FOR OPERATING ROPE* MASONRY STUD ANCHOR FIXING BOLTS* PIVOTING BYPASS DOOR* Hydro International Ltd • Unit 2, Rivermead Court • Kenn Business Park • Windmill Road • Kenn • Clevedon • BS21 6FT • Tel: 01275 878371 • Website: hydro-int.com • Email: enquiries@hydro-int.com This Hydro-Brake ® Optimum includes: •All in Grade stainless steel • Integral pivoting by-pass door allowing clear line of sight through to outlet, c/w operating rope • Media blasted for corrosion resistance • Variable flow rate post installation via adjustable inlet (if necessary) • Indicative Weight: • Product Carbon Footprint: Based on a 3rd party verified EPD: hydro-int.com/epdhydro-int.com/patents HYDRO-BRAKE IS A REGISTERED TRADEMARK FOR FLOW CONTROLS DESIGNED AND MANUFACTURED EXCLUSIVELY BY HYDRO INTERNATIONAL (m)(l/s) 1.200 8.600 0.355 8.588 0.769 6.983 7.459 150 830385140 620 280 890 SHE-0133-8600-1200-8600 SHE-0133-8600-1200-8600 25/06/2026 07:55 Emyvale Marc McBride © 2026 Emyvale 2 marc.mcbride@cspringle.com 3 mm 304L 25 kg 104.99 kgCO2eRECEIVED: 09/07/2026 Technical Specification Original Se tting M inimum Se tting M aximum Se tting Control Point He ad (m)Flow (l/s)He ad (m)Flow (l/s)He ad (m)Flow (l/s) Primary Design 1.200 8.600 1.200 7.552 1.200 9.516 Flush-Flo™0.355 8.588 0.532 6.714 0.318 10.163 Kick-Flo®0.769 6.983 0.768 6.123 0.770 7.740 Mean Flow 7.459 6.164 8.494 0 2 4 6 8 10 0.0 0.5 1.0 1.5 Flow (l/s)Head (m) Head (m)Flow (l/s) 0.000 0.000 0.041 1.043 0.083 3.576 0.124 6.300 0.166 7.813 0.207 8.177 0.248 8.402 0.290 8.527 0.331 8.580 0.372 8.585 0.414 8.555 0.455 8.503 0.497 8.434 0.538 8.347 0.579 8.238 0.621 8.094 0.662 7.898 0.703 7.628 0.745 7.262 0.786 7.057 0.828 7.228 0.869 7.394 0.910 7.557 0.952 7.715 0.993 7.870 1.034 8.022 1.076 8.170 1.117 8.316 1.159 8.459 1.200 8.599 DESIGN ADVICE The head/flow characteristics of this SHE-0133-8600-1200-8600 Hydro-Brake® Optimum Flow Control are unique. Dynamic hydraulic modelling evaluates the full head/flow characteristic curve. !The use of any other flow control will invalidate any design based on this data and could constitute a flood risk. DATE 25/06/2026 07:55 SHE-0133-8600-1200-8600SiteEmyvale DESIGNER Marc Mc Bride Hydro -Brake® OptimumRefEmyvale 2 © 2024 Hy dro International, Riv ermead Court, Kenn Business Park, Windmill Road, Kenn, Clev edon, BS21 6FT. Tel 01275 878371 Fax 01275 874979 Web www.hy dro-int.com Email designtools@hydro-int.com hydro-int.com/patents RECEIVED: 09/07/2026 kingspan.ie/klargester Water Management Solutions Klargester Product Guide The Klargester range of fully integrated wastewater management, surface water and rainwater harvesting solutions RECEIVED: 09/07/2026 —2 Water Management Solutions About Kingspan Global Reach Trusted Water Management Solutions Kingspan, manufacturers of the Klargester Product Range, are the water management experts with over 60 years of innovation and knowledge. We design and manufacture tried and tested water management solutions on a global scale for the leisure, public, hospitality, transport and domestic sectors whilst offering one of the largest and most technologically advanced wastewater ranges available. Our technical support teams provide focused customer service from delivery scheduling to consultancy and installation guidance. We give you the confidence of support over the lifetime of the product and beyond, in your local area. Operating in over 85 countries worldwide, we offer a global distribution network backed by experienced local sales and technical teams. UK & Ireland Asia—South East Melbourne USA Poland South America France Germany Italy Norway Sweden Middle East Spain Sydney Brisbane Turkey Expert TechnicalSupport We stand by the quality and performance of Kingspan water management solutions and our support doesn’t stop once your tank is installed. Our world class design consultancy is complemented by engineering expertise and advice as well as service throughout your domestic, commercial or industrial water management project. We use the latest design technology to produce drawings of extremely high quality. Our project management process is a step-by-step one, to ensure the very best experience and results. It covers everything from system sizing, product selection and system design to calculations, manufacturing, installation and delivery. Our advice also spans water management specification, design, product application and integration with building regulations, code compliance and site work installation practices to meet the most demanding effluent qualities, flow rates and discharge consents. Contact our technical team today for expert advice and information on any of our water management solutions. Email: water-IE@kingspan.com Kingspan’s support doesn’t stop once you have purchased the product. Our expert team are here to help you with technical, sales and delivery enquiries. We are dedicated to our customers and pride ourselves on top class customer service. Nationwide DistributionLocally Accessible —2 —3 Water Management Solutions RECEIVED: 09/07/2026 —4 —5 Water Management Solutions Regional Installations Multi-Housing Development Dundee, Scotland A complex sewage treatment and surface pumping solution to meet the varying needs of multiple housing. The Castlefields Inn Clifford, England BioDisc commercial sewage treatment plant providing an efficient water management solution. Elite Office Furniture Goole, England Surface water separators, foul, effluent and crude sewage pump stations, grease trap and BioFicient commercial system. Everton FC (Training Ground) Liverpool, England Modular BioFicient commercial system including fuel/oil separators for a complete wastewater management solution. Primark Distribution Centre Kettering, England Modular BioFicient commercial system for multi-million pound distribution centre. Barn Conversion Wing, England Domestic BioDisc sewage treatment plant, ensuring a safe, odour-free environment. Supermarket Car park London, England Bypass separator, NSBE50, to assist in decontamination of surface water drainage. Thanet Earth Kent, England Four vertical pumping stations to aid water management for a complex greenhouse development. UK Manchester City FC Manchester, England Oil separators for its all-important surface water drainage system. UK UK UK UK UK UK UK UK Dundee Wing London Co. Fermanagh Kettering Co. Louth Clifford Goole Liverpool Manchester Kent Manufactured in the UK and Ireland, the Klargester Product Range is supported by our nationwide network of dedicated external Area Sales Managers. We offer free site visits to discuss project specific requirements and provide a detailed written report and specification to recommend the best water management solution for your project. We also provide on-site installation assistance when required and help you with formal discussions with Building Control, Local Planning departments, The Environment Agency/SEPA, architects and consultants. To arrange your free site survey contact us now on 028 3026 6799 (NI); 048 3026 6799 (ROI) or email water-IE@kingspan.com Kingspan operates in over 85 countries worldwide, with currently over 5 million water management system installations. Take a look at a selection of our case studies for the Klargester Product Range. Social Housing Installation Co. Louth, Ireland Rainwater harvesting solution used to flush the WCs in each home. The system is fully integrated with the main plumbing, easing demand on the mains supply. IREMarble Arch Caves Co. Fermanagh, N. Ireland Grease separator and BioDisc sewage treatment plant work together giving optimum performance and extremely low running costs. IRE RECEIVED: 09/07/2026 —6 —7 Water Management Solutions 02 First Stage Biological Treatment The liquor and fine solids then flow into the Biological Treatment Zone 1 where the first stage of treatment occurs. 03 Second Stage Biological Treatment The liquor is then fed forward at a controlled rate into Biological Treatment Zone 2 for further cleaning. 04 Final Settlement Tank The clean liquid passes into the final settlement tank where it can be discharged to ground or watercourse. First Stage Biological Treatment Control Panel Final Settlement Tank Second Stage Biological Treatment 01 Primary Settlement Tank Wastewater and sewage flows into the primary settlement tank where the large solids are retained for future removal. Klargester BioDisc® Domestic Sewage Treatment Plant Noise Free Technical SpecificationsProduct Benefits ∙Utilises Rotating Biological Contactor technology. ∙Low running costs. ∙Low level visibility with a lockable child- proof cover – safe for children and pets. ∙For NIEA, BA-BC models deliver 95% pollution removal, whilst the BioDisc+P achieves 97.8% for BOD removal. ∙10 year warranty options available when purchased with a service and maintenance plan. ∙Supplied with a control panel and alarm. ∙Managed Flow System. ∙Totally silent in operation. ∙The most stable process in the market. ∙Controls the discharge volume. The Rotational Biological Contactor The RBC is central to the operation of each Klargester BioDisc®. It supports a biologically active film or biomass onto which aerobic micro-organisms, naturally found in sewage, become established. Natural breakdown of sewage can then occur as described below. Performance and Compliance › Certified to European Standard BS EN 12566 Part 3. › Performance certified to achieve 10mg/l BOD, 15mg/l SS and 3.8mg/l ammonia. › Fully marked in line with the CPR 2013. › Building control and S.R.66:2015 compliant (BA BioDisc). The Klargester domestic BioDisc ® is engineered to treat wastewater to the highest level of standards and offers one of the lowest lifetime costs compared to other treatment processes. Applications: The Klargester domestic BioDisc® BA–BC range is suitable for a variety of applications including: Primary Settlement Tank Model Reference BA*BA-X BB BC Population Equivalent (Std Flow)6 9 12 18 Maximum Daily BOD (kg)0.36 0.54 0.72 1.08 Maximum Daily Flow (m3)1.2 1.8 2.4 3.6 Ø/Width (mm)Ø1995 Ø1995 Ø1995 Ø2450 Length (mm)---- Inlet Invert depth (mm)450/750/1250 450/750/1250 450/750/1250 600/1100 Depth Below Inlet Invert (mm)1400 1400 1400 1820 Outlet Invert depth (mm)1315 1315 1315 1735 Overall Height (mm)2160/2460/2960 2160/2460/2960 2160/2460/2960 2825/3325 Height to Rim of Cover (mm)1945/2245/2745 1945/2245/2745 1945/2245/2745 2485/2985 Empty Weight (kg)310/325/380 310/325/380 335/350/405 650/750 Standard Power Supply 1 phase 1 phase 1 phase 1 phase Motor Rating - 1 Phase (Watts)50 50 50 75 Full Load Current 1 Phase (amps)0.51 0.51 0.51 1.1 Optional Power Supply N/A N/A N/A 3 phase Motor Rating - 3 Phase (Watts)N/A N/A N/A 90 Full Load Current 3 Phase (amps)N/A N/A N/A 0.38 Sludge Return Pump Rating (watts)250 250 250 250 * BA BioDisc - S.R.66:2015 compliant. Single & Multiple Homes Small Offices Light Industrial Premises Farms Barn Conversions Improved performance to 97.8% BOD removal with our new BioDisc+P model (NI Region only) BA BioDisc S.R.66:2015 Compliant RECEIVED: 09/07/2026 —8 —9 Water Management Solutions 01 Primary Chamber Raw sewage gravitates to the unit where it is received in the primary settlement zone. Here, gross solids and other social debris settle to the bottom of the tank where they remain until the tank requires desludging. Settled sewage is displaced from primary zone and enters the first of two sequential moving aerated media reactors. BioZone Primary Settlement Tank Final Settlement Tank Klargester BioFicient® Domestic Sewage Treatment Plant Performance and Compliance › BS EN 12566 Part 3 tested and approved. › Industry leading NH4 (ammonia) removal. › Fully marked in line with the CPR 2013. › Building control and S.R.66:2015 compliant. Model Reference BioFicient 1 BioFicient 2 BioFicient 3 BioFicient 4 BioFicient 5 BioFicient 6 Population Equivalent 6 8 10 15 20 30 Overall Diameter (mm) 1,540 1,420 1,420 1,920 1,920 1,920 Length (mm)2,500 3,760 3,760 3,230 4,390 6,220 Depth (mm)1,794-2,104 1,830/2,330/ 2,830 1,830/2,330/ 2830 2,300/2,800/ 3,300 2,300/2,800/ 3,300 2,300/2,800/ 3,300 Inlet Invert (mm)*500-810/ 500-810*500/1,000/ 1,500 500/1,000/ 1,500 500/1,000/ 1,500 500/1,000/ 1,500 5,00/1,000/ 1,500 Outlet Invert (mm)600-910/ 555-865* 600/1,100/ 1,600* 600/1,100/ 1,600* 630/1,130/ 1,630* 630/1,130/ 1,630 630/1,130/ 1,630 Material MDPE GRP GRP GRP GRP GRP Blower Ratings 50W 75W 75W 95W 115W 225W Cover sizes 700 1,500 x 900 1,500 x 900 1,500 x 900+600**1,500 x 900+600**1,500 x 900+ 600** Technical Specifications Note: Optional inlet depth down to 1800mm *BioFicient IPS models only (Outlet Depth 320mm) | **BioFicient 4, 5, 6 has two shafts. The Klargester BioFicient® treatment plant provides a reliable and effective solution for domestic applications without access to mains drainage. Suitable for homes with up to 30 people, the BioFicient is manufactured from high quality materials and uses the latest treatment technology to deliver a high level of water discharge quality. Product Benefits ∙Shallow Dig. ∙New low energy compressor. ∙Low level visibility with a lockable child- proof cover – safe for children and pets. ∙Suitable for installation in traffic areas (structural advice required). ∙Supplied with a control panel and alarm. ∙Easy to set up and operate. ∙Integral pump option available for BioFicient 1-4. Applications The Klargester domestic BioFicient® 1–6 range is suitable for use across the following applications: Control Panel Included 02 Biozone 1 & 2 Solids are broken down by air agitated media in the Biozone. Media and liquid circulation in the Biozone is achieved through the use of a compressor and diffuser, which introduces fresh air into each compartment. The liquor is constantly recirculated and contacts the moving media. As it does so, it is purified by the micro organisms growing on the surface of the media and within the moving liquor. Excess growth of biomass is shed as solid particles into the liquor. 03 Final Settlement Tank Fine solids are settled out in the final settlement tank. The Final effluent is discharged via either gravity outlet or IPS (Integral Pump System) chamber. With regulatory approval, it is suitable for discharge to a watercourse or drainage field. Single & Multiple Homes Small Offices Light Industrial Premises Farms Barn Conversions Control Panel S.R.66:2015 Compliant RECEIVED: 09/07/2026 —10 —11 Water Management Solutions Klargester BioFicient+® Domestic Sewage Treatment Plant The Klargester BioFicient+ sewage treatment plant provides a reliable and effective solution, suitable for homes with up to 10 people and is S.R.66:2015 compliant. The Klargester BioFicient+ unit is a new generation of package sewage treatment plant developed to treat domestic sewage waste. With two sizes available, it offers a simple and compact system comprising three treatment zones within a ‘uni-tank’ design. The moving aerated media process used is a compact development of the traditional biological process and provides a more effective and complete means of sewage treatment. Performance and Compliance › Fully marked in line with the CPR 2013. › Fully compliant, tested and approved to IS EN12566 / S.R.66: 2015. › Conforms with NIEA 95% BOD removal. Easy to Install Applications The Klargester domestic BioFicient+ range is suitable for a variety of applications, including: Single & Multiple Homes Small Offices Light Industrial Premises Farms Barn Conversions Model BioFicient 1+BioFicient 2+ Population Equivalent 6 10 Overall Diameter (mm) 1,690 2,010 Length (mm)2,480 3,189 Depth (mm)2,355 2,785 Inlet Invert (mm)*575-1,500 700-1,500 Outlet Invert (mm)675-1,600 800-1600 Material MDPE MDPE Blower Ratings 50W 95W Cover sizes 700 700 Technical Specifications Note: Models BioFicient1+ and BioFicient 2+ available to NI Market only. Optional inlet depth down to 1800mm *BioFicient IPS models only (Outlet Depth 320mm) 03 The final settlement tank is where fine solids form to sludge. At preset intervals, portions of the sludge and liquor are returned to the primary tank for additional treatment. The primary and final settlement zones should be emptied of sludge every 12 months. 04 Final effluent is discharged from the final settlement tank. With regulator approval, it is suitable for discharge to a watercourse or drainage field. 01 Wastewater and sewage flows into the primary settlement tank where solids are settled out and retained. Settled sewage is displaced from primary zone and enters the aerated media reactor (Biozone). 02 Solids are broken down by air agitated media in the Biozone. Media and liquid circulation in the Biozone is achieved through the use of a compressor and diffuser, which introduces fresh air into each compartment. The liquor is constantly recirculated and contacts the moving media and as it does so, it is purified by the micro organisms growing on the surface of the media and within the moving liquor. Excess growth of biomass is shed as solid particles into the liquor. Product Benefits ∙ Shallow dig with minimal visual impact. ∙ Easy and affordable installation. ∙Low power consumption. ∙Modern design allows for desludging through the wide neck. ∙BioFicient+ conforms with NIEA 95% BOD removal. Biozone Primary Settlement Tank Final Settlement TankS.R.66:2015 Compliant Conforms with NIEA 95% BOD removal RECEIVED: 09/07/2026 —13 Water Management Solutions —12 A reed bed is a filtration process used in conjunction with a Klargester sewage treatment system to further enhance the quality of the effluent migrating into a drainage field or surrounding watercourse. Technical Specifications Klargester Reed Beds Model Reference Population Equivalent Length (mm)Width (mm)Depth (mm)No. Required Outlet Size (mm) HRB006 6 2500 800 800 2 110 HRB012 12 2500 800 800 4 110 Product Benefits ∙Tertiary treatment for new applications with tight discharge consents. ∙Satisfies new building regulations. ∙Improved effluent quality for existing works. ∙Very low maintenance. ∙Aesthetically pleasing and environmentally friendly. ∙Easy to install and maintain. ∙Effluent discharge is typically improved by at least 50% providing reduced BOD and suspended solids. Environmental Regulators and British Water have developed the system selection process below, to help in guiding you through the process to choose the correct system to meet your requirements. 800 Outlet from treatment plant Outlet from treatment plant 800 Selecting the Correct Solution To ensure selection of the correct sewage treatment and disposal method to meet your requirements, expert advice should be sought. In all instances a sewage treatment plant should be considered as the first option. Site Assessment Connect to SewerIs a gravity connection possible? Pump Chamber Septic Tank or Sewage Treatment Plant Do you have sufficient land space for drainage fluid? Sewage Treatment Plant Do you have access to a water course? (NI Region only) Cesspool Do you have access to a mains server?YES YES YES YES NO NO NO NO Vp < 12 or >100 Vp 12 - 100 Did you know? If you have a septic tank that discharges to an open waterway or drainage ditch, by law, you will need to replace this with a treatment system before you sell your property. For expert advice please call 028 3026 6799 (NI); 048 3026 6799 (ROI) or email water-IE@kingspan.com Regulations Compliant How it works 2500 RECEIVED: 09/07/2026 —14 —15 Water Management Solutions Klargester Gamma Septic Tank The Klargester Gamma tank is an affordable solution for domestic applications with an efficiency rating of 99.97% – an industry benchmark. Manufactured from tough polyethylene, the tank is robust and lightweight which makes it easy to handle and install. Due to its design features, the Gamma tank is the perfect solution where a shallow dig installation is required, reducing installation time and costs. — Product Benefits ∙Manufactured from robust, impact resistant, high quality polyethylene. ∙Strong, easy to move and simple to install. ∙ Lower excavation costs, less soil disposal and less backfill material. ∙ Wide neck for easy access for annual desludging. ∙Trimmable neck to suit site. Model Reference Volume (L)No. People (150 Ltrs/head/day)Width (mm)Length (mm)Height (mm)Standard Inlet Invert (mm)Standard Outlet Invert (mm)Depth (mm) GST028 2800 5 1130 2480 1755 - 2255 550-1050 550-1050 2255 GST035 3500 10 1180 3000 1755 - 2255 550-1050 550-1050 2255 GST040 4000 13 1215 3360 1755 - 2255 550-1050 550-1050 2255 Technical Specifications Performance & Compliance › 99.97% efficiency rating. › BS EN 12566 Part 1 approved. › Fully marked in line with the CPR 2013. › Building control and S.R.66:2015 compliant. Applications The Klargester Alpha and Gamma septic tank ranges, each comprise three sizes and are typically suitable for applications not connected to mains drainage including: Performance & Compliance › Performance tested to BS EN 12566 Part 1 requirements. › Fully marked in line with the CPR 2013. Klargester Alpha Septic Tank Klargester Alpha tanks provide a reliable and economic solution for homes not connected to mains drainage. Model Reference Volume (L)No. People (150 Ltrs/head/day)Overall Diameter (mm)Height (mm)Standard Inlet Invert (mm)Standard Outlet Invert (mm) STS02810 2800 5 2075 2599/3099 1000/1500 1050/1550 STS03810 3800 12 2075 2810/3310 1000/1500 1050/1550 STS04610 4600 17 2084 2984/3484 1000/1500 1050/1550 Technical Specifications Basic septic tanks only retain solids and discharge effluent of low quality. The installation will not contaminate any ditch, stream or other watercourse. However, many local authorities prohibit their use. In all instances a sewage treatment system should be considered as a first option. Septic tanks may be installed, subject to consent, in applications where: ∙Soil is of suitable porosity. ∙Installation complies with Building Regulations (Approved Document H). ∙The installation will not contaminate any ditch, stream or other watercourse. ∙The plot is large enough. — Product Benefits ∙Made from composite GRP - strong, light, and watertight. ∙Press moulded shape provides wide, squat, form which makes the tank easy to install and handle. ∙Stable base for storage. ∙Lifting eyes are provided for lifting and positioning within the excavation. Single and Multiple Homes Mobile Homes Farms Temporary Work Offices and Welfare Facilities Golf Course Toilet Facilities Churches S.R.66:2015 CompliantRECEIVED: 09/07/2026 —16 —17 Water Management Solutions Klargester Sigma Septic Tank The Klargester Sigma shallow dig septic tank is designed to reduce both installation time and cost. The range is available in various sizes suitable for properties with dig height restrictions. Product Benefits ∙Made from GRP - strong and durable for ultimate reliability. ∙Robust and simple to install, reducing on site installation time. ∙Lower excavation costs, less soil disposal and less backfill material required. ∙Light, watertight and chemically resistant. ∙ Robust, weatherproof for guaranteed durability, giving you value for money. Technical Specifications Performance and Compliance › Certified to BS EN 12566 Part 1 › Fully marked in line with the CPR 2013. Model Reference Volume (L)No. People (150 Ltrs/head/day)Overall Diameter (mm)Length (mm)Standard Inlet Invert (mm)Standard Outlet Invert (mm)Depth (mm) STH028 2800 5 1225 2955 500 530 1627/1587* STH038 3800 12 1225 3895 500 530 1617/1577* STH057 5700 24 1425 4275 500 530 1826/1786* STH071 7150 34 1920 3225 500 550 2290 STH091 9150 47 1920 3960 500 550 2290 *110mm diameter pipework/ 160mm diameter pipework Nominal Litres Capacity (Gallons)Length (mm)Diameter (mm) 18,000 3960 4317 2620 22,000 4889 5073 2620 26,000 5720 5837 2620 34,000 7480 7376 2620 46,000 10,120 9684 2620 54,000 11,880 11,222 2620 59,000 12,968 11,991 2620 63,000 13,860 12,760 2620 71,000 15,620 14,295 2620 79,000 17,380 15,833 2620 Technical Specifications Klargester Below Ground Water Storage Tanks and Cesspools The range of Klargester below ground storage tanks provide a reliable solution for the collection and retention of sewage (cesspool), surface water, veterinary / animal waste, firefighting reservoirs and rainwater harvesting reservoirs. The advanced design of the Klargester below ground storage tanks ensures consistent high performance, even in the toughest environmental conditions. Product Benefits ∙Easy to install with minimal on site installation time. ∙ Designed in accordance with BS6297, ensuring that you meet all building regulations. ∙High level alarm available for complete peace of mind. ∙ Lockable manhole cover for ultimate security. Applications Klargester Sigma septic tanks and below ground water storage tanks and cesspools, offer a solution for applications not connected to mains drainage including: Single and Multiple Homes Mobile Homes Farms Temporary Work Offices and Welfare Facilities Golf Course Toilet Facilities Churches RECEIVED: 09/07/2026 —18 —19 Water Management Solutions Performance & Compliance › Odour free – fully tested and compliant with BS EN13725/NI Water approved. › Designed for applications selected in compliance with British Water Code of Practice Flows and Loads. › 100% compliance with industry requirements across commercial sectors, including national and international regulations such as BS EN12255 and EN12566-3 (up to 50 PE). Primary Settlement Tank Second Stage Biological Treatment Final Settlement Tank First Stage Biological Treatment 01 Primary Settlement Tank This is the initial stage of treatment and simply involves the retention of coarse solids present in raw sewage and wastewater for subsequent gradual breakdown. BioDisc® features one chamber to ensure efficient operation with a flow balancing facility. 02 First Stage Biological Treatment The liquor and fine solids then flow into the first stage of Biological Treatment. A unique managed flow system ensures peak performance by smoothing variable loads. 03 Second Stage Biological Treatment The liquor is then fed forward at a controlled rate into Biological Treatment stage 2 for further cleaning. This process ensures the whole media area available is utilised ensuring maximum efficiency. 04 Final Settlement Tank The surplus micro-organisms continuously slough off the discs and are carried forward to the final settlement where they settle out as a humus sludge, leaving a clear treated effluent to be discharged to ground or water course. The settled humus sludge is returned to the Primary Settlement Tank by the sludge return pump under timer control. The sludge return pump also removes any floating scum which helps to keep the final settlement tank working efficiently. Klargester BioDisc® Commercial SewageTreatment Plant Delivered as a single, packaged system, the Klargester BioDisc® RBC range (up to 300PE), offers low running costs due to its unique design and operational efficiencies. Single Piece System Technical Specifications Model Reference BD BE BF BG BH BJ BK BL BM BN Maximum Daily BOD (kg)1.5 2.1 3 4.2 4.5 6 7.5 9 13.5 18 Maximum Daily Flow (m3)5 7 10 14 15 20 25 30 45 60 Ø/Width (mm)2450 2450 2450 2450 2450 2450 2450 2450 2450 2450 Length (mm)3340 3340 4345 5235 7755 7755 7755 7755 10420 13100 Inlet Invert depth (mm)600/1100 600/1100 600/1100 600/1100 600/1000 600/1000 600/1000 600/1000 600/1000 600/1000 Depth Below Inlet Invert (mm)1820 1820 1820 1820 1790 1790 1790 1790 1790 1790 Outlet Invert Depth (mm)1735 1735 1720 1720 1640 1640 1640 1640 1640 1640 Overall Height (mm)2825/3325 2825/3325 2825/3325 2825/3325 2830/3230 2830/3230 2830/3230 2830/3230 2830/3230 2830/3230 Height to Rim of Cover (mm)2485/2985 2485/2985 2485/2985 2485/2985 2490/2890 2490/2890 2490/2890 2490/2890 2490/2890 2490/2890 Empty Weight (kg)1100/1200 1200/1300 1315/1465 1660/1810 3000/3020 3100/3120 3200/3220 3300/3320 4200/4250 5500/5650 Standard Power Supply 1 phase 1 phase 1 phase 1 phase 1 phase 1 phase 1 phase 1 phase 1 phase 1 phase Motor Rating - 1 Phase (Watts)75 75 120 180 250 250 370 370 550 2 x 370 Full Load Current 1 Phase (amps)1.1 1.1 1.3 1.6 1.5 1.5 2.35 2.35 2.8 2 x 2.35 Optional Power Supply 3 phase 3 phase 3 phase 3 phase 3 phase 3 phase 3 phase 3 phase 3 phase 3 phase Motor Rating - 3 Phase (Watts)90 90 120 180 250 250 370 370 550 2 x 370 Full Load Current 3 Phase (amps)0.38 0.38 0.42 0.63 0.88 0.88 1.35 1.35 2.8 2 x 1.35 Sludge Return Pump Rating (watts)250 250 250 250 250 250 250 250 250 250 Product Benefits ∙Unique RBC technology. ∙Tried and tested technology, offers robust and efficient water management treatment. ∙Low running costs. ∙Noise free. ∙Fully removable lid for easy desludging. ∙ Fully packaged system, delivered direct on site. ∙ Bespoke technical support offered from our in-house technical teams. ∙Can be upgraded to include NI Water Controls and desludge system for NI Water adoption. ∙Process designed to NIEA requirements.RECEIVED: 09/07/2026 —20 —21 Water Management Solutions 02 Sectional Media Modules The Biozone media within the Klargester BioDisc® modular system, is built up in ‘wedge’ sections to make a two metre diameter rotor assembly. A complete wedge can be removed from the rotor for maintenance or inspection without compromising the overall rotor structure. This ensures the rotor assembly can stay in place, without the need for removal. 03 Rotor Support Bearings The rotor assembly is supported by a pillow block bearing at each end of the rotor shaft. These are equipped with self lubricating grease cartridges to provide continual lubrication. Both of the bearings can be accessed by removing the individual covers for maintenance. It is not necessary to remove the larger main covers, allowing for easier maintenance. 04 Strapping/Lifting Options The treatment plant can be lifted from the side by forklift truck. Forklift tubes are built into the steel construction frame. The unit can also be lifted at either end with the aid of extension forks. Alternatively, the unit can be lifted with slings. Four lifting brackets are attached to the frame and lifting shackles are provided with each unit. 01 Flow Management Process The unique flow management process of the Klargester commercial BioDisc® allows for complete flexibility of forward feed rate. Rotating buckets transfer untreated water through each of the BioZones, allowing for total forward feed control. These are independently driven and allow the buckets to run at a different speed to the rotor. Sectional Media Modules Flow Management Process Rotor Support Bearings Strapping Options Model Reference Daily Flow (l/day)Daily Load (kg/BOD/day)Length(mm)Width(mm)Height(mm)Weight(kg)Motor Power RBC250 50,000 15 6,700 2,210 2,400 5,000 1.1 Kw/400v Technical Specifications Max daily flow based on 200 L/Person/Day, system PE will vary by site flow rate per person. The Klargester modular RBC system is designed for applications with higher populations. The RBC comprises of a complete modular system containing the RBC units along with primary and final settlement tanks. Both the RBC units and tanks can be increased in numbers or size to make a flexible system for an expanding or phased population growth. Each unit is supplied as a 250PE unit and further units supplied depending on population requirements. Primary and final settlement tanks can be sized for the intended end population or additional tanks can be supplied in the future and fed into the system. Each of the units can be linked to create a complete sewage treatment system. The feed to each RBC can be controlled independently to give further flexibility. The RBC unit measures 6.7 metres long x 2.2 metres wide x 2.4 metres high. The size of primary and final settlement tanks will vary with each customer application and site location. Klargester BioDisc® Modular RBC Commercial Sewage Treatment Plant The larger Klargester BioDisc® modular RBC system is designed for applications with higher populations, with each unit supplied as a 250PE unit. Modular RBC System The RBC comprises a complete modular system, supplied as 250PE modules. Their unique design is containerised for ease of transport. Flexible modular layouts available to suit even the toughest site conditions. Total flexibility with a unique modular RBC system Primary Settlement Tank Final Settlement Tank Primary Settlement Tank Final Settlement Tank Primary Settlement Tank Final Settlement Tank Due Spring 2018!Brand New Solution Available in our Modular SystemRECEIVED: 09/07/2026 —22 —23 Water Management Solutions Klargester BioFicient® Commercial Sewage Treatment Plant Primary Settlement Chamber Biozone 1 Product Benefits ∙Adaptable to specific consent requirements including ‘Total Nitrogen’. ∙ Low head loss. ∙ Minimal footprint area and visual impact. ∙ Variable invert options (0.5 - 2.0 m). ∙ May be installed in trafficked areas (subject to loading). ∙ Low maintenance. ∙ Alarm protected. 02 Biozone 1 The liquor enters the first stage of Biological treatment where the active bacteria within the fluidized bed begin to break down organic solids. The majority of BOD removal occurs here. 01 Primary Settlement Chamber This is the initial stage of treatment and simply involves the retention of coarse solids present in raw sewage and wastewater for subsequent gradual breakdown. BioFicient features two chambers to ensure efficient operation with a flow balancing facility. The Klargester BioFicient commercial sewage treatment plant is designed with efficiency in mind. It offers reliable performance using tried and tested technology to ensure consistently high effluent quality. Applications: The BioFicient range is suitable for a range of applications including: Campsites Public sector Transport Hospitality Offices Multi-housing developments Leisure Performance and Compliance › Compliant with EN- 12255 and EN12566- 3 (up to 50 PE). › Designed and sized in accordance with British Water Code of Practice Flows and Loads but can be sized to suit local site conditions. — 2.6m diameter BioFicient is also available as an alternative model. — Technical Specifications Biozone 2 Final Settlement Tank Model Reference 17H 23H 34H 38H 42H 47H 55H 67H 80H A Overall Length (m)7.4 9.3 7.4 8.1 8.9 9.7 11.2 13.5 15.8 B Overall Width (m)1.9 1.9 1.9 1.9 1.9 2.8 2.8 2.8 2.8 C Height (m) 560mm Inlet / 860mm Outlet Invert*2.28 2.28 3.02 3.02 3.02 3.02 3.02 3.02 3.02 1060mm Inlet / 1360mm Outlet Invert*2.78 2.78 3.52 3.52 3.52 3.52 3.52 3.52 3.52 1560mm Inlet / 1860mm Outlet Invert*3.28 3.28 4.02 4.02 4.02 4.02 4.02 4.02 4.02 2060mm Inlet / 2360mm Outlet Invert*3.78 3.78 4.52 4.52 4.52 4.52 4.52 4.52 4.52 Diameter (m)1.8 1.8 1.8 1.8 1.8 2.6 2.6 2.6 2.6 Volume (m3)17 23 34 38 42 47 55 67 80 Weight Approx (kg)1200 1450 3000 3200 3400 3800 4200 4700 5400 Inlet / Outlet Diameter (mm)160 160 160 160 160 160 160 160 160 Maximum Flow (m3/day) Models 8 11 15 20 25 30 40 50 60 Retention Time (hrs)76 66 51 43 39 35 31 31 30 03 Biozone 2 Within the second stage of Biological treatment the second fluidized bed continues to clean the liquor giving further BOD reduction along with removal of nitrogen. 04 Final Settlement Tank A natural by-product of biological treatment is humus sludge and this is separated for further treatment. The treated effluent is discharged via the outlet or to disinfection stage. Available in our Modular SystemRECEIVED: 09/07/2026 —24 —25 Water Management Solutions Choosing theRight Separator Kingspan has a specialist team who provide expert technical assistance in selecting the appropriate Klargester Separator for your application. The chart below gives guidance to aid selection of the appropriate type of fuel/ oil separator for use in surface water drainage systems which discharge into rivers and soakaways. Full retention separators are used in high risk spillage areas such as fuel distribution depots, vehicle workshops and scrap metal recycling yards. Each full retention separator design includes the necessary volume requirements for: ∙ Oil separation capacity. ∙ Oil storage volume. ∙ Silt storage capacity. ∙ Coalescer (Class 1 units only). ∙ Automatic closure device. Our full retention separators treat the whole of the specified flow. Klargester Full Retention Separators NSF RANGE Model Reference Flow(l/s) Drainage Area (m2) PPG-3 (0.018) Storage Capacity (Ltrs)Length(mm)Diameter(mm) Manhole Cover Dimensions (mm) Base Inlet Invert (mm) Base to Outlet Invert (mm) Min Inlet Invert(mm) Standard Pipework Diameter(mm)Silt Oil Polyethylene Chamber Construction NSFP003 3 170 300 30 1700 1350 600 1410 1335 550 160 NSFP006 6 335 600 60 1700 1350 600 1410 1335 550 160 GRP Chamber Construction NSFA010 10 555 1000 100 2610 1225 600 1050 1000 500 200 NSFA015 15 835 1500 150 3910 1225 600 1050 1000 1000 200 NSFA020 20 1115 2000 200 3200 2010 600 1810 1760 1000 315 NSFA030 30 1670 3000 300 3915 2010 600 1810 1760 1000 315 NSFA040 40 2225 4000 400 4640 2010 600 1810 1760 1000 315 NSFA050 50 2780 5000 500 5425 2010 600 1810 1760 1000 315 NSFA065 65 3160 6500 650 6850 2010 600 1810 1760 1000 315 NSFA080 80 4445 8000 800 5744 2820 600 2500 2450 1000 315 NSFA100 100 5560 10000 1000 6200 2820 600 2500 2450 1000 400 NSFA125 125 6945 12500 1250 7365 2820 600 2500 2450 1000 450 NSFA150 150 8335 15000 1500 8675 2820 600 2500 2450 1000 525 NSFA175 175 9725 17500 1750 9975 2820 600 2500 2450 1000 525 NSFA200 200 11110 20000 2000 11,280 2820 600 2500 2450 1000 600 * Some units have more than one access shaft – diameter of largest shown. Technical Specifications Full Alarm Range Available Performance and Compliance › Kingspan were one of the first UK manufacturers to have the required range certified to EN 858-1 in the UK. › The NSF number denotes the flow at which the separa- tor operates. › Approved by The British Standards Institute (BSI) in relation to flow and process perfor- mance, meeting effluent quality requirements of EN 858-1. Is there a risk of oil contaminating thedrainage from the site? Risk of infrequent light contamination and potential for small spills only, e.g. car park Source control SuDS must be consideredand incorporatedwhere suitable If not suitable Separator notrequired Risk of regular contamination of surface water runoff with oil and/or risk of larger spills, e.g. vehicle maintenance area, goods vehicle parking or vehicle manoeuvring5 Drainage will also contain dissolved oils, detergents or degreasers such as vehicle wash waterand trade effluents,e.g. industrial sites Fuel oils aredelivered toand dispensed on site, e.g. retailforecourts Very low risk of oilcontamination,e.g. roof water YES YES YES YES YES YES YES YES YES NO Bypass separator with alarm required Class I if discharge to surface water2,3 Full retention separator with alarm required Class I if discharge to surface water2 Class II if discharge to foul sewer1 The use of SuDS should be considered at all sites and they should be incorporated where suitable. SuDS can be used to polish the effluent from these separators before it enters the environment6 Source control SuDS should be considered where possible Trade effluents must be directed to the foul sewer1 It may need to pass through a separator before discharge to sewer for removal of free oils Full retention ‘forecourt’ separator with alarm required Class I if discharge to surface water2 Class II if discharge to foul sewer1,4 Clean water should not be passed through the separator unless the size of the unit is increased accordingly 1 You must seek prior permission from your local sewer provider before you decide which separator to install and before you make any discharge. 2 You must seek prior permission from the relevant environmental body before you decide which separator to install. 3 In this case, if it is considered that there is a low risk of pollution a source control SuDS scheme may be appropriate. 4 In certain circumstances, the sewer provider may require a Class 1 separator for discharges to sewer to prevent explosive atmospheres from being generated. 5 Drainage from higher risk areas such as vehicle maintenance yards and goods vehicle parking areas should be connected to foul sewer in preference to surface water. 6 In certain circumstances, a separator may be one of the devices used in the SuDS scheme. Ask us for advice.RECEIVED: 09/07/2026 Water Management Solutions Bypass separators are used when it is considered an acceptable risk to not provide full treatment for very high flows, such as where the risk of a large spillage and heavy rainfall occurring at the same time is small. Typical applications include surface carparks, roadways and lightly contaminated commercial areas. Performance & Compliance › Fully compliant and tested to EN 858-1. › Bypass separators are tested by British standards institute (BSI). › Certified flow and process performance assessing effluent qualities to the requirements of EN 858-1. › The unit is designed to treat the ‘first flush’ - 10% of peak flow. The calculated drainage areas served by each separator are indicated according to the formula given by PPG3 NSB = 0.0018A(m2). › Class I separators are designed to achieve a concentration of less than 5mg per litre. Klargester Bypass Separators NSB RANGE Model Reference Flow(l/s) Peak Flow Rate(l/s) Drainage Area(m2) Based on UK rainwater flow Storage Capacity (Ltrs)Length(mm)Diameter(mm) Access Shaft Diameter (mm) Base Inlet Invert (mm) Base to Outlet Invert (mm) Standard Fall Across (mm) Min Inlet Invert(mm) Standard Pipework Diameter(mm)**Silt Oil Polyethylene Chamber Construction NSBP003 3 30 1670 300 45 1700 1350 600 1420 1320 100 500 160 NSBP004 4.5 45 2500 450 60 1700 1350 600 1420 1320 100 500 160 NSBP006 6 60 3335 600 90 1700 1350 600 1420 1320 100 500 160 GRP Chamber Construction NSBE010 10 100 5560 1000 150 2069 1220 750 1450 1350 100 700 315 NSBE015 15 150 8335 1500 225 2947 1220 750 1450 1350 100 700 315 NSBE020 20 200 11111 2000 300 3893 1220 750 1450 1350 100 700 375 NSBE025 25 250 13890 2500 375 3575 1420 750 1680 1580 100 700 375 NSBE030 30 300 16670 3000 450 4265 1420 750 1680 1580 100 700 450 NSBE040 40 400 22222 4000 600 3230 1920 600 2185 2035 150 1000 500 NSBE050 50 500 27778 5000 750 3960 1920 600 2185 2035 150 1000 600 NSBE075 75 750 41667 7500 1125 5841 1920 600 2235 2035 200 950 675 NSBE100 100 1000 55556 10000 1500 7661 1920 600 2235 2035 200 950 750 NSBE125 125 1250 69444 12500 1875 9548 1920 600 2235 2035 200 950 750 * Some units have more than one access shaft – diameter of largest shown | ** Larger pipework available on request. Technical Specifications Concentration Less Than 5 MG/L —26 Product Benefits ∙Light and easy to install. ∙Inclusive of silt storage volume. ∙Fitted inlet/outlet connectors. ∙Vent points within necks. ∙ Oil alarm system available (required by EN 858-1 and PPG3). ∙Extension access shafts for deep inverts. ∙Maintenance from ground level. ∙ GRP or polyethylene construction (subject to model). Klargester Forecourt Separators Fuel & Oil Separator Alarms Forecourt separators are used to intercept hydrocarbon pollutants such as petroleum and oil to prevent their entry to the drainage system. Typical applications include petrol filling station forecourts and car breaker yards. Performance and Compliance ∙Operation ensures that the flow cannot exit the unit without first passing through the coalescer assembly. ∙In normal operation, the forecourt separator has sufficient capacity to provide storage for separated pollutants within the main chamber, but is also able to contain up to 7,600 litres of pollutant arising from the spillage of a fuel delivery tanker compartment on the petrol forecourt. ∙The separator has been designed with an automatic closure device to ensure that oil cannot exit the separator in the event of a major spillage, consequently the separator should be emptied immediately. Installation ∙The unit should be installed on a suitable concrete base slab and surrounded with concrete or pea gravel backfill. ∙If the separator is to be installed within a trafficked area, then a suitable cover slab must be designed to ensure that loads are not transmitted to the unit. ∙The separator should be installed and vented in accordance with Health and Safety Guidance Note HS(G)41 for filling stations. ∙Subject to Local Authority requirements. British European Standard EN 858-1 and Environment Agency Pollution Prevention Guideline PPG3 requires that all separators are to be fitted with an oil level alarm system. It should be installed and calibrated by a suitably qualified technician so that it will respond to an alarm condition when the separator requires emptying. Product Benefits ∙Easily fitted to existing tanks. ∙Excellent operational range. ∙Visual and audible alarm. ∙Additional telemetry option. Technical Specifications Expert Technical Advice HOW THEY WORK An alarm system with up to 3 probe sensors is installed within the separator automatically monitoring the levels of oil, silt and liquid within. If excessive levels are reached the alarm activates to notify of excessive liquid levels. Alarm allows you time to take corrective action ensuring the safe and economic operation of separators preventing oil passing through the separator and polluting watercourses which may result in expensive fines and clean up costs. DO YOU POSE AN OIL CONTAMINATION RISK? DO YOU STORE OIL ON SITE? DO YOU HAVE A CAR PARK FOR MORE THAN 50 CARS? DO YOU HAVE GOODS VEHICLE MOVEMENTS? INTERCEPTORS TRAP OIL AND OTHER HYDROCARBONS THAT HAVE ENTERED DRAINS PREVENTING POLLUTION INCIDENTS. PPG3 STATES: INTERCEPTORS MUST HAVE A VISUAL AND AUDIBLE WARNING WHEN OIL REACHES 90% STORAGE VOLUME EUROPEAN STANDARD EN858-1-2: SUGGESTS SEPARATORS ARE FITTED WITH AN ALARM THAT WARNS OF EXCESSIVE LIQUID LEVELS. EXCESSIVE SILT, OIL OR LIQUID LEVELS WILL PREVENT THE INTERCEPTOR FROM WORKING EFFECTIVELY ALLOWING OIL TO PASS THROUGH AND POLLUTE WATERCOURSES. MONITORING OF INTERCEPTORS / SEPARATORS YES THEN IT’S LIKELY YOU HAVE INTERCEPTORS ON SITE. DID YOU KNOW: It costs on average £600 to empty an interceptor. Interceptors need emptying ONLY if oil or silt exceeds 90% storage volume or every five years. There is now a more effective and efficient way of monitoring interceptors. These systems can pay for themselves within one year ALARM INDICATES HIGH WATER LEVEL ALARM INDICATES HIGH SILT LEVEL ALARM INDICATES HIGH OIL LEVEL HOW THEY WORK An alarm system with up to 3 probe sensors is installed within the separator automatically monitoring the levels of oil, silt and liquid within. If excessive levels are reached the alarm activates to notify of excessive liquid levels. Alarm allows you time to take corrective action ensuring the safe and economic operation of separators preventing oil passing through the separator and polluting watercourses which may result in expensive fines and clean up costs. DO YOU POSE AN OIL CONTAMINATION RISK? DO YOU STORE OIL ON SITE? DO YOU HAVE A CAR PARK FOR MORE THAN 50 CARS? DO YOU HAVE GOODS VEHICLE MOVEMENTS? INTERCEPTORS TRAP OIL AND OTHER HYDROCARBONS THAT HAVE ENTERED DRAINS PREVENTING POLLUTION INCIDENTS. PPG3 STATES: INTERCEPTORS MUST HAVE A VISUAL AND AUDIBLE WARNING WHEN OIL REACHES 90% STORAGE VOLUME EUROPEAN STANDARD EN858-1-2: SUGGESTS SEPARATORS ARE FITTED WITH AN ALARM THAT WARNS OF EXCESSIVE LIQUID LEVELS. EXCESSIVE SILT, OIL OR LIQUID LEVELS WILL PREVENT THE INTERCEPTOR FROM WORKING EFFECTIVELY ALLOWING OIL TO PASS THROUGH AND POLLUTE WATERCOURSES. MONITORING OF INTERCEPTORS / SEPARATORS YES THEN IT’S LIKELY YOU HAVE INTERCEPTORS ON SITE. DID YOU KNOW: It costs on average £600 to empty an interceptor. Interceptors need emptying ONLY if oil or silt exceeds 90% storage volume or every five years. There is now a more effective and efficient way of monitoring interceptors. These systems can pay for themselves within one year ALARM INDICATES HIGH WATER LEVEL ALARM INDICATES HIGH SILT LEVEL ALARM INDICATES HIGH OIL LEVEL HOW THEY WORK An alarm system with up to 3 probe sensors is installed within the separator automatically monitoring the levels of oil, silt and liquid within. If excessive levels are reached the alarm activates to notify of excessive liquid levels. Alarm allows you time to take corrective action ensuring the safe and economic operation of separators preventing oil passing through the separator and polluting watercourses which may result in expensive fines and clean up costs. DO YOU POSE AN OIL CONTAMINATION RISK? DO YOU STORE OIL ON SITE? DO YOU HAVE A CAR PARK FOR MORE THAN 50 CARS? DO YOU HAVE GOODS VEHICLE MOVEMENTS? INTERCEPTORS TRAP OIL AND OTHER HYDROCARBONS THAT HAVE ENTERED DRAINS PREVENTING POLLUTION INCIDENTS. PPG3 STATES: INTERCEPTORS MUST HAVE A VISUAL AND AUDIBLE WARNING WHEN OIL REACHES 90% STORAGE VOLUME EUROPEAN STANDARD EN858-1-2: SUGGESTS SEPARATORS ARE FITTED WITH AN ALARM THAT WARNS OF EXCESSIVE LIQUID LEVELS. EXCESSIVE SILT, OIL OR LIQUID LEVELS WILL PREVENT THE INTERCEPTOR FROM WORKING EFFECTIVELY ALLOWING OIL TO PASS THROUGH AND POLLUTE WATERCOURSES. MONITORING OF INTERCEPTORS / SEPARATORS YES THEN IT’S LIKELY YOU HAVE INTERCEPTORS ON SITE. DID YOU KNOW: It costs on average £600 to empty an interceptor. Interceptors need emptying ONLY if oil or silt exceeds 90% storage volume or every five years. There is now a more effective and efficient way of monitoring interceptors. These systems can pay for themselves within one year ALARM INDICATES HIGH WATER LEVEL ALARM INDICATES HIGH SILT LEVEL ALARM INDICATES HIGH OIL LEVEL —27 SeparatorClass Backfill Type Total Capacity (Ltrs) Drainage Area (m 2)Peak Flow Rate (L/s)Length(mm)Diameter(mm) Access Shaft Diameter (mm) Base Inlet Invert (mm) Base to Outlet Invert (mm) Standard Fall Across (mm) Min Inlet Invert(mm) Standard Pipework Diameter(mm) EmptyWeight(kg) I/II Concrete 10000 835 15 3915 2020 600 2180 2130 50 600 160 620 I/II Concrete 10000 1115 20 3915 2020 600 2180 2130 50 600 200 620RECEIVED: 09/07/2026 Water Management Solutions Klargester Grease Separators Klargester grease separators are an effective and hygienic method of separating fat and grease from wastewater flow. Grease separators are designed for restaurants, hotels, public houses, canteens and similar applications. Key Standard Features ∙Greatly reduces drain blockages, for maximum operational efficiency. ∙Helps improve performance of septic tanks and field drains and achieve best results. ∙Prevents contamination of small sewage treatment plants, reducing risk of breakdown. ∙Protects mains drainage system from grease blockages. How it works Grease separators allow fats and grease to naturally separate out from water, allowing their removal prior to the wastewater reaching the drainage system. The separator should be installed close to the source of contamination before any foul waste can enter the drainage flow and to suit the expected liquid temperature. Grease Range Sizing Table Technical Specifications —28 Meals Per Day Standard Meal Fast Food Fine Cuisine 40 NSG01 NSG01 NSG02 60 NSG02 NSG02 NSG02 80 NSG02 NSG02 NSG04 100 NSG02 NSG04 NSG04 200 NSG04 NSG06 NSG09 300 NSG06 NSG09 NSG14 500 NSG09 NSG14 NSG18 700 NSG14 NSG18 NSG24 900 NSG18 NSG24 — 1,300 NSG24 —— Model Reference Dimensions (mm)Flow Rates (L/s)Shipping Height (mm)Capacity (L)Approx Weight (Kg)Fall AcrossThe Unit (mm)Length Width Empty Full NSG01 1320 750 1 1100 500 70 570 75 NSG02 1620 1100 2 1175 1000 90 1090 75 NSG04 2072 1224 4 1570 2000 120 1860 70 NSG06 3018 1224 6 1570 3000 160 2820 70 NSG09 3895 1224 9 1570 4000 190 3760 70 NSG14 4418 1422 14 1745 6000 215 5535 70 NSG18 3231 1917 18 2120 8000 300 7162 70 NSG24 4386 1917 24 2120 11000 380 9885 70 Easy to Install Klargester Washdown and Silt Units Klargester washdown and silt units can be used in areas such as car wash and other cleaning facilities that discharge directly into a foul drain, which feeds to a municipal treatment facility. How it works As contaminated water passes through the separation chamber, it is retained long enough to allow solids to sink to the bottom of the unit. Our design uses a maximum of six minutes hydraulic retention time, at the flow rate given. The separator water is then able to discharge safely. The nature of the silt varies depending on either the ground or surface receiving the flow. These aspects should be considered when selecting the size of the unit in relation to the flow being treated. If emulsifiers are present, the discharge must not be allowed to enter an NS unit. Applications These units can be used to serve vehicle washdown areas and car wash facilities, although it should be noted that the prime function of such separators is for the removal of silt. Typical locations using wash down separators are: car wash, tool hire depots, truck cleansing, construction compounds cleansing points. Locations requiring silt separators are: highly silted sites where NS separators are used, i.e. works constructions sites and temporary work compounds. Our washdown and silt separators are manufactured from durable, rot and corrosion proof glass reinforced polyester combining light weight with outstanding strength. The units are delivered complete with inlet and outlet pipework as well as factory fitted access shafts to ensure quick and easy installation on site. Model Ref Total Capacity (Ltrs) Max.rec. Silt (Ltrs) Max. Flow Rate(L/s) Length(mm)Diameter(mm) Access Shaft Di-ameter (mm) Base Inlet Invert (mm) Base To Outlet Invert (mm) Stan-dard Fall Across (mm) Min Inlet Invert(mm) Standard Pipework Diameter(mm) Approx.Empty (Kg) W1/010 1000 500 3 1123 1225 460 1150 1100 50 500 160 60 W1/020 2000 1000 5 2074 1225 460 1150 1100 50 500 160 120 W1/030 3000 1500 8 2952 1225 460 1150 1100 50 500 160 150 W1/040 4000 2000 11 3898 1225 460 1150 1100 50 500 160 180 W1/060 6000 3000 16 4530 1440 600 1360 1310 50 500 160 320 W1/080 8000 4000 22 3200 2020 600 2005 1955 50 500 160 585 W1/100 10000 5000 27 3915 2020 600 2005 1955 50 500 160 680 W1/120 12000 6000 33 4640 2020 600 2005 1955 50 500 160 770 W1/150 15000 7500 41 5435 2075 600 1940 1890 50 500 160 965 W1/190 19000 9500 52 6865 2075 600 1940 1890 50 500 160 1200 Technical Specifications —29 RECEIVED: 09/07/2026 —30 —31 Water Management Solutions Klargester Compact Pumping Stations Our proven range of compact pump stations can be used for effluent or sewage and are easy to install. Quick to install and easy to maintain, Klargester pump stations are the ideal solution for outbuildings and extensions, cellars, pool houses and external WCs. They can be used for effluent or sewage, depending on the pump, distance and height. Product Benefits ∙Non-return valves and outlet pipe compression coupling as standard. ∙3 pump options; effluent low head, effluent high head and sewage vortex. ∙Service and maintenance plans available to prolong the life of the pump systems. ∙Complete pre-fabricated solution ready for installation. ∙Fully automatic. Technical Specifications Chamber Size (mm)Capacity (Ltrs)Tank Material Control Panel Alarm Pump Type 610 x 700 200 GRP N/A Optional Single 560 x 1,650 400 GRP N/A Optional Single All Klargester pumping stations are suitable for pumping wastewater effluent and sewage in accordance with BS 756-2. They are also designed in line with Building Regulations for Foul Drainage. Your system size will depend on the type of waste you need to manage, your distance from the sewer and the difference in levels. For expert advice, to help you select the correct system, please contact our specialist team on: NI: 028 3026 6799 | ROI: 048 3026 6799 or email: water-IE@kingspan.com The key factors to size your system are as follows: ∙Application: domestic, residential or commercial. ∙Material application: sewage, effluent or surface water. ∙Inlet depth (below ground level). ∙Pumping distance and lift. ∙Electrical supply. Klargester Domestic and Domestic+ Pumping Stations Our domestic pumping stations are ideal for homes or properties with up to 13 people. Quick and simple to install, they require minimal maintenance. They come with single or twin pumps, and are suitable for sewage, surface water and effluent. Appropriate for 24 hour storage requirements. Product Benefits ∙ Made with super-tough, low maintenance GRP and high quality polyethylene for guaranteed durability. ∙Comes with options of remote monitoring systems. ∙Designed with easy access features for maintenance. ∙Choose from either 110mm or 160mm inlet connections. ∙Lockable covers for optimum security. ∙Quick connection outlet couplings. Technical Specifications - Domestic Technical Specifications - Domestic+ Chamber Size Capacity (Ltrs) Tank Material Control Panel Alarm Pump Type 900 x 2580 1,600 GRP Included Optional Single/Twin 900 x 2080 1,250 GRP Included Optional Single/Twin Chamber Size Capacity (Ltrs) Tank Material Control Panel Alarm Pump Type 1000 x 2000 1450 Polyethylene Included Standard Single/Twin 1000 x 2500 2200 Polyethylene Included Standard Single/Twin Selecting the Correct Pumping Station System Applications Suitable for a wide range of applications, the compact and domestic range of Klargester Pumping Stations are suitable for the following types of applications and many more: Domestic Properties Roof and Surface Water Small Commercial Offices Remote ClassroomsRECEIVED: 09/07/2026 —32 —33 Water Management Solutions Klargester Horizontal Pumping Stations If power supplies fail, Klargester commercial pumping stations respond instantly, commercial responds instantly, separating liquids and solids into a separate chamber and storing waste for up to 24 hours. Once power is restored, the pumps will work normally again without further maintenance. Product Benefits ∙Single-tank installation up to 79m3 (multiple tank systems available). ∙Multiple valve chamber location and invert options. ∙Weir screen features innovative removable filters, so there’s no need to access the chamber during maintenance. ∙High-level alarm. ∙Totally sealed system. ∙ One-piece tank chamber for easy installation. ∙Minimal on-site assembly. ∙Less cranage and shallower excavation than concrete pumping stations. ∙On-site Health & Safety issues are minimised – no requirement for personnel to enter the tank. Commercial pump systems are made from GRP. It is designed as a single piece chamber with two separate sections, one for normal operation and one for emergency storage. Tank Size (mm)Capacity (Ltrs)Tank Material Control Panel Alarm Pump Type 2,600 Diameter 18000-79000 GRP Included Standard Single/Twin Technical Specifications Klargester Vertical Pumping Stations Product Benefits ∙High-level alarm. ∙Internal lifting chains and guide rails (as specified). ∙Wide range of pump options including macerators/vortex. ∙Range of emergency overflow tanks, if required. ∙ Inlet connection sizes to suit site. ∙Various invert depths and positions. ∙GRP chambers with internal pipework in plastic, galvanised or cast iron. ∙Optional kiosks with warning beacons and optional telemetry systems. ∙Service and maintenance plans available to prolong the life of the pump systems. Our Klargester commercial pumping systems are ideal for developments and premises where drainage by gravity is not an option. Tanks and pumps come in a range of sizes and dimensions and have a 24-hour storage capacity for foul waste to comply with Building Regulations. A wide range of surface water pumps are available for such applications from small roof run offs, to large SUDS schemes, delivering up to 70 litres/second. Klargester commercial pumping stations are made from robust GRP. They are designed as a single-piece chamber, ready for installation with no man-entry required. Technical Specifications Vertical Tank Size (mm)Capacity (Ltrs)Tank Material Control Panel Alarm Pump Type 1250 Diameter Up to 4,800 GRP Included Standard Single/Twin 1800 Diameter Up to 10,000 GRP Included Standard Single/Twin 2600 Diameter Up to 22,000 GRP Included Standard Single/Twin Applications Designed for easy installation and available in many sizes to meet an extensive range of customer requirements, the Klargester range of Horizontal and Vertical Pumping Stations are typically used in applications including: Housing Developments Hotels & Restaurants Caravan/ Camping Sites Nursing Homes Surface Water Run-off Large Commercial Developments Schools The adoptable and high specification pump stations are designed to NI Water Standard Specification (May 2016) and meet the requirements of ‘Sewers for Adoption 7th Edition’ and the ‘Water Industry Standard’ (WIS). For expert advice, please contact our specialist team on 028 3026 6799 (NI), 048 3026 6799 (ROI). Manufactured as a ready to install pre-fabricated unit for Type 1 and Type 2 installations for up to 20 dwellings. Product Benefits ∙GRP single piece wet well delivered to site ready to install. ∙ Pre-fitted internal pipework, pump guide rails and overflow filters. ∙ Approved control panel and kiosk. ∙ All necessary drawings supplied. ∙NI Water specified Controls and Hygiene unit. Klargester Adoptable and High Specification Pump SystemsRECEIVED: 09/07/2026 —34 —35 Water Management Solutions Klargester Gamma Fully Integrated Rainwater Harvesting System The Klargester Gamma rainwater harvesting system is designed as an intelligent rainwater harvesting system, tailor made for your home. With a technologically advanced finish, Gamma is suitable for both self build projects and residential developments. It works by taking the rain from your roof gutters, filtering out leaves and debris and storing the water in an underground tank. Manufactured from tough polyethylene, the tank is robust and lightweight, which makes it easy to handle and install. Its fuss free design offers high functionality, making it the perfect choice for your home or garden. Automatic in operation, the Gamma rainwater harvesting system offers powerful features for complete peace of mind in your home. The intelligent system ensures an automatic supply of harvested rainwater for your home and garden. For home and garden use, the Gamma is available in capacities between 2,350- 4,600 litres. Model Reference Tank Dimensions Capacity Standard Overall Height Standard Inlet Invert* Standard Outlet Invert*Length Width Gravity System GRW080 2,350 Ltrs 1,770mm 720mm 750mm 3,000mm 1,180mm GRW110 3,100 Ltrs 2,260mm 720mm 750mm 2,480mm 1,130mm GRW160 4,600 Ltrs 2,260mm 720mm 750mm 3,360mm 1,215mm Direct System GRW080 2,350 Ltrs 1,768mm 720mm 750mm 3,000mm 1,180mm GRW110 3,100 Ltrs 2,260mm 720mm 750mm 2,480mm 1,130mm GRW160 4,600 Ltrs 2,260mm 720mm 750mm 3,360mm 1,215mm * Includes tank neck - adjustable to suit required invert. The Gravity System uses an elevated header tank to store filtered water after the main tank. 01 The Gravity System The Direct System pumps water from the main storage tank and is used where a header tank is impractical. 02 The Direct System Features and Benefits ∙Can reduce water consumption in domestic applications by up to 50%. ∙Easy to install and simple to maintain. ∙‘Fit and Forget’ system, ensuring an automatic supply of harvested rainwater. ∙Shallow Dig—the Gamma is designed with easy, affordable installation in mind. ∙Pea shingle backfill available—no costly excavation and soil disposal necessary (dependent upon site conditions). ∙Fully compliant—Gamma is tested in accordance with BS 8515:2009. standards. Technical Specifications Home and Garden AdvisoryConsultants Reduces Water Consumption Offers Fast Payback Regulations Compliant 34 1 5 10 8 11 9 6 72 1 Water main 2 Storage tank 3 Header tank (optional extra) 4 Pressure Vessel (not supplied) 5 In-line filter 120 microns 6 Internal rainwater filter 7 Grundfos Intelligent Pump— SBA 3-23M 8 Adjustable tank neck 9 External tap (not supplied) 10 Roof rainwater feed 11 Filtered rainwater feed Typical Applications Include: Domestic Laundry WC Flushing Garden and Landscape Watering Vehicle Washing A Optional Extra - Header Tank When ordering your system, to make the Gravity System complete you will require a header tank. Klargester offers a header tank with weir, ballcock and float valve which allows the switch over to mains, the weir provides the mandatory air gap. A Mains Input B Rainwater Input C Water Regulations Compliant Mandatory Air Gap D Overflow Point E Rainwater Level Control F Mains Level Control B C D F ERECEIVED: 09/07/2026 —36 —37 Water Management Solutions Klargester Aquabank® Rainwater Harvesting Range Fully Compliant Easy to Install on water consumption in domestic applications with Klargester Rainwater Harvesting solutions Assists planning application — Authorities increasingly expect applications to Demonstrate Sustainable Drainage (SuDS) The system that pays for itself — money saved through reduced water bills means aquabank can pay back its purchase costs % Overview The Klargester Aquabank rainwater harvesting system is designed with simplicity in mind. 01 02 03 Aquabank is suitable for single residential applications. It uses cohesive design with the system controlled by a pump, with options for either direct or gravity fed applications. It’s a highly intuitive system – easy to use with no need for a control panel, display panel or depth sensor. Manufactured from strong GRP material, Aquabank is a complete ‘kit in a box’ – easy to install and the smart choice for your home’s rainwater harvesting needs. For home and garden use, the Aquabank is available in capacities between 1,000 and 6,000 litres. — Features and Benefits ∙Easy to install. ∙Simplified system designed for rapid installation. ∙Quick start set up procedure. ∙‘Kit in a box’ set of key components. ∙Easy conversion to gravity system with header tank. ∙Minimal energy use in operation. ∙Fully compliant - designed in accordance with BS EN8515. Rainwater is stored in underground tank Rainwater is pumped at a constant pressure to an elevated header tank Water is pumped to a garden sprinkler or hose as required Applications: Vehicle Washing Garden Watering Benefits of Installing Klargester Domestic Rainwater Systems 50SAVE UP TO How it works Model Capacity (Ltrs) Standard Overall Height Standard Inlet Invert Standard Outlet Invert Diameter / Width Length Gravity & Direct System AQB010 1,000 2,140mm 500-800mm 530-830mm 1,225mm 1,125mm AQB028 2,800 2,582mm 500-1000mm 530-1030mm 2,070mm — AQB038 3,800 2,811mm 500-1000mm 530-1030mm 2,070mm — AQB046 4,600 2,961mm 500-1000mm 530-1030mm 2,070mm — AQB060 6,000 2,365mm 500-800mm 530-830mm 1,424mm 4,275mm WC Flushing Domestic Laundry Klargester RainTrap® Rainwater Storage and Delivery System Overview An economical rainwater harvesting system designed to make garden watering simple. The Klargester RainTrap system comprises of a filter, an underground storage tank and a pump. Rainwater runs down the roof and into the guttering and downpipes in the normal way before passing through the filter, which removes any leaves or debris. Rainwater is stored in the underground tank from which it is pumped at a constant pressure to an outside tap as required. The RainTrap has many advantages over traditional garden waterbutts. In addition to being able to store far larger quantities of water, it removes the need to carry water around and does not flood when full, since the excess water exits via a soakaway or surface water drain. Features and Benefits ∙ Easy to install. ∙ Inexpensive. ∙Simple on / off operation. ∙Suitable for existing and new homes. ∙Available in sizes from 1,000 — 6,000 litres. ∙Automatic rainwater diversion when tank reaches full capacity. ∙Internal leaf filter. ∙Designed and manufactured in the UK. 4 56 1 2 3 7 Technical Specifications Model Reference Capacity (Ltrs)Diameter (mm)Height Base to Outlet (mm) RT2800 2,800 2,070 1,540 RT3800 3,800 2,070 1,760 RT4600 4,600 2,080 1,925 1. Pump power switch 2. Pumped water to required application, e.g. garden hose, power washer 3. Rainwater inlet (110mm) 4. Submersible pump 5. Wastewater / overflow outlet (110mm) 6. Leaf filter 7. Safety manhole lidRECEIVED: 09/07/2026 —38 —39 Water Management Solutions Klargester Commercial Below Ground Rainwater Harvesting System After Sales Service and Support The commercial range provides a secure solution for any size of building project from 6,000 litres up to 79,000 litres of water in a single tank. For larger capacities, multiple tanks may be connected together to meet storage requirements. It is available as either a gravity or direct system, depending on specific site requirements. Large installations are carefully sized and selected, taking into consideration the following factors: ∙Roof water yield. ∙ Projected water consumption. ∙Groundwork criteria (prevailing water table, soil conditions, requirements or traffic access). ∙ Suitable filters and pumps to match system specifications, ensuring the water is kept at an optimum level of clarity and supply pressure). To speak with us about any aspect of installation, commissioning or service simply contact: Tel: 0333 240 6868 Email: water-IE@kingspan.com kingspan.ie/klargester Together we are working to provide first class service across a range of sectors, including domestic, commercial, industrial, leisure, hospitality and many more. With expertise across the Klargester range of wastewater and drainage solutions, pumping stations, separators and rainwater harvesting, our dedicated support network offers the following offers the after sales service and support you would expect from a global organisation. ∙ First class technical engineering expertise across a range of off-mains sewage and wastewater applications. ∙Day to day technical support. ∙24 hour breakdown repair. ∙Preventative maintenance plans. ∙Installation and commissioning. ∙Asset monitoring. ∙Consultancy and advice. Features ∙Capacities from 6,000 to 79,000 litres within a single tank. ∙ Multiple tanks can be joined to cater for larger volumes. ∙ Can be installed under trafficked areas (with reinforced concrete support). ∙Complete packaged units delivered directly to site. Single Pump Model Reference Twin Pump Model Reference Capacity (Ltrs)Diameter(m) ENV0200SKSW ENV0200TKSW 6000 1.4 ENV0275SKSW ENV0275TKSW 8000 1.8 ENV0350SKSW ENV0350TKSW 10000 1.8 ENV0485SKSW ENV0485TKSW 14000 1.8 ENV0625SKSW ENV0625TKSW 18000 2.6 ENV0765SKSW ENV0765TKSW 22000 2.6 ENV0900SKSW ENV0900TKSW 26000 2.6 ENV1040SKSW ENV1040TKSW 30000 2.6 ENV1320SKSW ENV1320TKSW 38000 2.6 ENV1460SKSW ENV1460TKSW 42000 2.6 ENV1735SKSW ENV1735TKSW 50000 2.6 ENV2050SKSW ENV2050TKSW 59000 2.6 ENV2325SKSW ENV2325TKSW 67000 2.6 ENV2745SKSW ENV2745TKSW 79000 2.6 The Klargester commercial range is a fully integrated, intelligent rainwater harvesting solution suitable for such applications as commercial vehicle washdown areas, garden centres and golf courses. Technical Specifications We recognise the importance of after sales service and support and are proud of our nationwide Kingspan Service network, which comprises our Kingspan in-house Service team and Accredited Installer network in support of the Klargester Product Range.RECEIVED: 09/07/2026 UK Kingspan Environmental Ltd College Road North, Aston Clinton, Aylesbury, Buckinghamshire, HP22 5EW T: +44 (0) 1296 633000 F: +44 (0) 1296 633001 E: water@kingspan.com W: kingspan.co.uk/klargester Ireland Kingspan Environmental Ltd Unit 1a, Derryboy Road Carnbane Business Park Newry, BT35 6QH T: +44 (0) 28 3026 6799 E: water-IE@kingspan.com W: kingspan.ie/klargester Norway Kingspan Miljø AS Skiveien 42, 1410 Kolbotn, Norway T: +47 22 02 19 20 E: avlopslosninger@kingspan.com W: kingspanklargester.com/no Germany Kingspan Environmental GmbH Siemensstr. 12a, D-63263 Neu-Isenburg, Deutschland T: +49 (0) 6102 3686700 E: wasser@kingspan.com W: kingspan.de/wasser Australia Kingspan Environmental Pty Ltd 8 Bessemer St, Blacktown Sydney, NSW 2148 T: +61 (0) 2 8889 5400 Toll Free: (within Australia) 1300 736 562 E: sales.au@kingspan.com W: kingspan.com.au/water Poland Kingspan Environmental Sp. z o.o. ul. Topolowa 5 62-090 Rokietnica Polska T: +48 61 660 94 71 E: woda@kingspan.com W: kingspan.pl/woda We take every care to ensure that the information in this document is accurate at the point of publication, but with continuous product development, details are subject to alteration without notice. Kingspan | Klargester Product Guide – English – January 2018 RECEIVED: 09/07/2026 Grasscrete the environmental paving solutionRECEIVED: 09/07/2026 the original ...the best, that’s the Grasscrete World 2 www.grasscrete.com GrasscreteRECEIVED: 09/07/2026 3development and applications Our history Grass Concrete Limited is a UK based company founded upon the principles of establishing environmental awareness in construction. Since our establishment in 1970 many of our aspirations that were then ‘alternative’ have now become part of mainstream policy adopted by governments and planners around the world. Barely an issue in those days, the company set out to change traditional thinking towards paving technology. The company’s credentials have grown with that of its original product, the unique Grasscrete paving system. Alongside this original invention further paving systems have been introduced as well as a range of earth retaining walls and green roofing solutions. Why Grasscrete? With architects and engineers now embracing environmental technology, the relevance of Grasscrete has never been greater. A product ahead of its time has found its era. As probably the world’s only supplier of a complete range of grass reinforcement products, we are able to say that Grasscrete stands alone in its unique capabilities. Though often thought of as a generic reference for grass reinforcement, it’s much more than that and, indeed, shouldn’t be confused with other types of grass paving. The lightweight Grasscrete void former can be easily and cost effectively shipped throughout the World. Availability is enhanced by an extensive network of International Licensees. Grasscrete is available in soil tone concrete. Please ask for further details of Terratone applications • Vehicle parking • Access roads • Fire and emergency access • Laybys / pull ins • Highway verges • Abnormal load diversions • SUDS (sustainable urban drainage system) • Helipads • Military installations • Slope protection • Drainage channels • Flood prevention • Swales • SpillwaysRECEIVED: 09/07/2026 4 www.grasscrete.com Grasscrete structural performance Resists differential settlement Modular, pre-cast concrete or plastic systems rely significantly on grass for stability by forming a composite tensile matrix. Under constant trafficking the combination of load and vibration can loosen root anchorage, leaving the surface prone to settlement in a syndrome known as ‘elephant tracking’. By contrast Grasscrete isn’t structurally influenced by grass and can therefore be trafficked before grass establishment. The reinforced structure resists differential settlement and the flat, upper surface and pocket shape minimises vibration. Ground heave Grasscrete’s unique pocket profile enables the release of frost heave and hydro-static pressure. These benefits enable the system to be used over frost influenced ground and in demanding slope protection works. Sub-base depth With an allowable ground-bearing requirement of just 45kN/m2, Grasscrete can be installed over slimmer sub-bases than required for pre-cast or plastic types. Edge details Modular pre-cast concrete or plastic systems require edge restraints or kerbs. For larger projects intermediate shear anchors may also be needed. Grasscrete however, requires no such details, enabling it to blend naturally with adjacent finishes with subtle delineation created by a monolithically cast solid concrete edge margin. Grasscrete combines the environmental appeal of natural grass with the engineering principles of reinforced concrete. Key benefits This unique cellular structure is created using the Grasscrete void former; vacuum formed with a patented anti-static coating to prevent concrete adhesion as well as enabling easy packing and separation.RECEIVED: 09/07/2026 5systems Pre-cast system lateral displacement Reliance upon grass cover for anchorage Sub-base deforms causing sub-grade to pump to surface Load Load Load LoadNo reliance upon grass cover for structural integrity Grasscrete Safe load distribution via reinforcement RECEIVED: 09/07/2026 6 www.grasscrete.com Grasscrete Permeability • Permeation rate up to 90% that of original ground • Helps to reduce shrinkage in underlying clays • Reduces on and offsite drainage requirements • Works with BREEAM, LEED and BASIX environmental systems Filtration • Natural bio-filter created by organic/granular layers Flood prevention and control • Reduces surface water run-off • Highly effective armouring layer for fast flowing water movement and storage • Gives a hard engineering solution a soft landscape feel Greenspace • Promotes a feeling of greenspace well-being • Helps to reduce the Urban Heat Island Effect • Digests CO2 at ground level emission source Recycling • Significant re-cycled content in void former manufacture • Promotes re-use and re-cycling of topsoils and aggregates in construction Carbon mileage • Lightweight formers and patented nesting reduces transported volume • Combines with locally sourced materials for construction key environmental benefits RECEIVED: 09/07/2026 7drainage technology sustainable drainage technology(SUDS) Standard permeation Advanced attenuation/rainwater harvesting Rainfall Natural filtration to sub-grade Pop-up sprinkler (can be solar powered) Riser pipe on ring main Needle punched geo-textile Low fines granular material Low permeability geo-textile Rainfall Permeation Needle punched geo-textile Low fines granular layer Geo-textile Rainfall Harvestingor Rainwater harvesting with irrigation RECEIVED: 09/07/2026 8 www.grasscrete.com Grasscrete slope protection The Grasscrete construction phase also holds a number of key advantages for contractors when compared with pre-cast systems: • The cast insitu process enables bays to be cast in varying locations and sequences safe in the knowledge that they will all eventually come together. This compares to the need to follow a strict linear process for installing pre-cast blocks to ensure that bonding is maintained. • Site storage and handling requirements are minimised with one 12 metre long container of Grasscrete formers being able to cover the same area as forty 12 metre long loads of pre-cast blocks. • In addition to normal topsoil and grass infill the Grasscrete pockets can also be filled with 20-5mm graded gravel for below water-line locations. • The “at risk” period during the temporary works is much less for Grasscrete as it will perform without grass growth. This compares to pre-cast block types where grass growth is essential to maintaining stability. Grasscrete has been flow tested to rates in excess of 8 metres per second, enabling it to be used in exacting locations. Aquatic planting Geo-textile Sand blind to regulated sub-grade Gravel / stone fill below water-line Venting of hydrostatic and frost pressure The natural revetment system Full concrete surround to void prevents soil wash out RECEIVED: 09/07/2026 9installation installation 10/20mm sand Sub-base Edge formwork 100mm gap from formwork Place 600 x 600mm formers edge to edge Finish with squeegee Concrete to standard Grasscrete mix design Pour via staging board Working space 1. Preparation 2. Lay formers 5. Melt former tops with flame gun 6. Top soil and seed 3. Mesh reinforcement 4. Concrete Place mesh reinforcement in formers After initial settlement, top up soil levels and seed RECEIVED: 09/07/2026 10 www.grasscrete.com Grasscrete Types Specification Void former size: 600 x 600 x 76mm Paving depth: 76mm Mesh reinforcement: BS4483 Ref. A142 or A193 (200 x 200 x 6mm dia. or 200 x 200 x 7mm dia.) Concrete coverage: 22m2/m3 Topsoil coverage: 24m2/m3 Void former size: 600 x 600 x 150mm Paving depth: 150mm Mesh reinforcement: BS4483 Ref. A252 or A393 (200 x 200 x 8mm dia. or 200 x 200 x 10mm dia.) Concrete coverage: 11.50m2/m3 Topsoil coverage: 12m2/m3 GC3 GC2 Grasscrete cast on site reinforced cellular paving. Grasscrete formers type GC.......*, .......*mm deep laid on a consolidated sub-base with a 10 /20mm blinding layer of sand. Steel mesh reinforcement to BS4483 reference .......*, weighing .......*kg/ m2. Concrete 30MN/m2 at 28 days with air entrainment of 3%. 10mm maximum aggregate and a .......*mm slump placed around formers and mesh and levelled to tops of formers. (Where coloured concrete is required please suffix the GC former type reference with “Terratone” eg “GC3/Terratone”.) After 48 hours melt exposed tops of formers and fill with soil. Following settlement sow Grassmix No.......* at a rate of 50g/m2 and top up with fine friable topsoil, apply fertiliser as necessary. Expansion joints shall be incorporated at maximum 10 x 10m centres and shall consist of 25mm wide pre-soaked softwood filler. Or for GC2 with A393 mesh only, and normally only when used for heavy load transference: Expansion joints shall be incorporated at maximum 10 x 10m centres and shall consist of 25mm wide foamboard filler with 20mm diameter x 300mm long sawn mild steel dowels at 400mm centres with cap and debond to one side. Joint shall be sealed with cold applied sealant. *Refer to data in Grasscrete Types table and Specification Guide for items to be completed. Void former size: 600 x 600 x 100mm Paving depth: 100mm Mesh reinforcement: BS4483 Ref. A193 or A252 (200 x 200 x 7mm dia. or 200 x 200 x 8mm dia.) Concrete coverage: 15.50m2/m3 Topsoil coverage: 18m2/m3 GC1 RECEIVED: 09/07/2026 11specification Specification guide Maximum Grasscrete Depth Reinforcement Minimum Sub-base vehicle type Sub-base type weight depth* 0 - 3.4 tonnes GC3 76mm A142 100mm 3.4 - 4.3 tonnes GC3 76mm A193 150mm 4.3 - 10.8 tonnes GC1 100mm A193 150mm 10.8 - 13.3 tonnes GC1 100mm A252 150mm 13.3 - 30.0 tonnes GC2 150mm A252 150mm 30.0 - 40.0 tonnes GC2 150mm A393 200mm Vehicular use (UK) Specification for Highway Works Clause 803 Type 1 sub-base (International) 40mm down crushed stone granular sub-base *Assumes a free draining allowable ground bearing of 45kN/m 2 which should also be sufficient to enable construction plant/delivery access. Water environment Water flow rate Grasscrete Depth Reinforcement Preparation type (all types) Up to 4.5 GC3 76mm A142 metres/second Up to 6.0 GC1 100mm A193 metres/second Up to 9.0 GC2 150mm A252 metres/second Seed specification Trimmed earth sub-grade Sand blind Suitable geo-textile Fine protective cover of sand } Mix Sowing rate *Specification (temperate European) Application No. 1 35gms/m2 50% perennial ryegrass Vehicular parking, 20% slender creeping red fescue amenity areas 25% strong creeping red fescue 5% browntop bent No. 2 30gms/m2 20% chewings fescue Fire paths, shaded 20% slender creeping red fescue low maintenance areas 30% strong creeping red fescue 25% hard fescue 5% browntop bent No. 3 20gms/m2 25% perennial ryegrass Slopes, road verges 20% strong creeping red fescue 30% hard fescue 10% smooth stalked meadow grass 10% browntop bent *For other climate types 5% white clover please contact us Please contact us for further information and advice relating to special mixes for applications such as water courses and spillways. Further specification information can also be found under NBS reference Q21-125RECEIVED: 09/07/2026 www.grasscrete.com Grass Concrete Limited Duncan House, 142 Thornes Lane, Thornes, Wakefield, West Yorkshire WF2 7RE, England Tel: +44(0)1924 379443 Fax: +44(0)1924 290289 info@grasscrete.com Please note that information is given in good faith, without warranty and subject to alteration without prior notice. A full range of brochures and technical guides are available upon request @grasscreteworld grasscreteworldRECEIVED: 09/07/2026 RECEIVED: 09/07/2026 RECEIVED: 09/07/2026 RECEIVED: 09/07/2026 APPENDIX D Irish Water Confirmation Of Feasibility RECEIVED: 09/07/2026 Stiúrthóirí / Directors: Jerry Grant (Cathaoirleach / Chairperson), Niall Gleeson (POF / CEO), Douglas Millican, Michael Nolan, Patricia King, Eileen Maher, Cathy Mannion, Michael Walsh, Rena O’Sullivan and Orlagh Nevin. Oifig Chláraithe / Registered Office: Teach Colvill, 24-26 Sráid Thalbóid, Baile Átha Cliath 1, D01 NP86 / Colvill House, 24-26 Talbot Street, Dublin, Ireland D01NP86 Is cuideachta ghníomhaíochta ainmnithe atá faoi theorainn scaireanna é Uisce Éireann / Uisce Éireann is a designated activity company, limited by shares. Cláraithe in Éirinn Uimh.: 530363 / Registered in Ireland No.: 530363 CONFIRMATION OF FEASIBILITY Philip Rowland 36 Moor Road Coalisland Tyrone BT714QB 7 April 2026 Our Ref: CDS26000136 Pre-Connection Enquiry Future Building Site, Scarnageeragh, Emyvale, Monaghan Dear Applicant/Agent, We have completed the review of the Pre-Connection Enquiry. Uisce Éireann has reviewed the pre-connection enquiry in relation to a Water & Wastewater connection for a Housing Development of 30 unit(s) at Future Building Site, Scarnageeragh, emyvale, Monaghan, (the Development). Based upon the details provided we can advise the following regardi ng connecting to the networks; Water Connection Feasible Without Infrastructure Upgrade by Uisce Éireann Water Treatment Connection feasible without infrastructure upgrades. Water Network Connection to 75mm water main nearest the site is feasible without infrastructure upgrades. Wastewater Connection Feasible Subject to Upgrades Wastewater Treatment Connection feasible without infrastructure upgrades. Wastewater Network An approximately 55m 225mm wastewater extension is required to connect this development to the existing network. RECEIVED: 09/07/2026 This letter does not constitute an offer, in whole or in part, to provide a connection to any Uisce Éireann infrastructure. Before the Development can be connected to our network(s) you must submit a connection application and be granted and sign a connection agreement with Uisce Éireann. As the network capacity changes constantly, this review is only valid at the time of its completion. As soon as planning permission has been granted for the Development, a completed connection application should be submitted. The connection application is available at www.water.ie/connections/get-connected/ Where can you find more information? • Section A - What is important to know? • Section B - Details of Uisce Éireann’s Network(s) This letter is issued to provide information about the current feasibility of the proposed connection(s) to Uisce Éireann’s network(s). This is not a connection offer and capacity in Uisce Éireann’s network(s) may only be secured by entering into a connection agreement with Uisce Éireann. For any further information, visit www.water.ie/connections, email newconnections@water.ie or contact 1800 278 278. Yours sincerely, Dermot Phelan Connections and Developer Services RECEIVED: 09/07/2026 Section A - What is important to know? What is important to know? Why is this important? Do you need a contract to connect? • Yes, a contract is required to connect. This letter does not constitute a contract or an offer in whole or in part to provide a connection to Uisce Éireann’s network(s). • Before the Development can connect to Uisce Éireann’s network(s), you must submit a connection application and be granted and sign a connection agreement with Uisce Éireann. When should I submit a Connection Application? • A connection application should only be submitted after planning permission has been granted. Where can I find information on connection charges? • Uisce Éireann connection charges can be found at: https://www.water.ie/connections/information/charges/ Who will carry out the connection work? • All works to Uisce Éireann’s network(s), including works in the public space, must be carried out by Uisce Éireann*. *Where a Developer has been granted specific permission and has been issued a connection offer for Self-Lay in the Public Road/Area, they may complete the relevant connection works Fire flow Requirements • The Confirmation of Feasibility does not extend to fire flow requirements for the Development. Fire flow requirements are a matter for the Developer to determine. • What to do? - Contact the relevant Local Fire Authority Plan for disposal of storm water • The Confirmation of Feasibility does not extend to the management or disposal of storm water or ground waters. • What to do? - Contact the relevant Local Authority to discuss the management or disposal of proposed storm water or ground water discharges. Where do I find details of Uisce Éireann’s network(s)? • Requests for maps showing Uisce Éireann’s network(s) can be submitted to: datarequests@water.ie RECEIVED: 09/07/2026 What are the design requirements for the connection(s)? • The design and construction of the Water & Wastewater pipes and related infrastructure to be installed in this Development shall comply with the Uisce Éireann Connections and Developer Services Standard Details and Codes of Practice, available at www.water.ie/connections Trade Effluent Licensing • Any person discharging trade effluent** to a sewer, must have a Trade Effluent Licence issued pursuant to section 16 of the Local Government (Water Pollution) Act, 1977 (as amended). • More information and an application form for a Trade Effluent License can be found at the following link: https://www.water.ie/business/trade-effluent/about/ **trade effluent is defined in the Local Government (Water Pollution) Act, 1977 (as amended) RECEIVED: 09/07/2026 Section B – Details of Uisce Éireann’s Network(s) The map included below outlines the current Uisce Éireann infrastructure adjacent the Development: To access Uisce Éireann Maps email datarequests@water.ie Reproduced from the Ordnance Survey of Ireland by Permission of the Government. License No. 3-3-34 Note: The information provided on the included maps as to the position of Uisce Éireann’s underground network(s) is provided as a general guide only. The information is based on the best available information provided by each Local Authority in Ireland to Uisce Éireann. Whilst every care has been taken in respect of the information on Uisce Éireann’s network(s), Uisce Éireann assumes no responsibility for and gives no guarantees, undertakings or warranties concerning the accuracy, completeness or up to date nature of the information provided, nor does it accept any liability whatsoever arising from or out of any errors or omissions. This information should not be solely relied upon in the event of excavations or any other works being carried out in the vicinity of Uisce Éireann’s underground network(s). The onus is on the parties carrying out excavations or any other works to ensure the exact location of Uisce Éireann’s underground network(s) is identified prior to excavations or any other works being carried out. Service connection pipes are not generally shown but their presence should be anticipated. RECEIVED: 09/07/2026